Steel personnel and fire exit doors in Warwickshire

Quick answer

Plant rooms, switch rooms and back doors in Warwickshire need doors that are tough and secure. We fit steel doors with louvres, hinge bolts, multi-point locks and closers to suit each opening.

Area: Warwickshire
Nation: England
Main town: Warwick
Survey: Free for new installations

What to specify

Emergency devices. Lever or push-pad devices to BS EN 179 for exits used by trained staff.
Louvres and vision. Louvred leaves for plant rooms and vision panels where visibility helps.
Outside access. Key or code access from outside while the exit stays free from inside.
Galvanised steel. Double-skin galvanised steel leaves with powder-coated finishes.
Fire-rated doorsets. Fire-resisting steel doors with the manufacturer's test evidence, fitted to its instructions.

Typical scopes of work

Installing a leaf-and-a-half steel doorset so equipment can pass through a plant room door when needed.
Replacing a rotted timber fire exit door with a galvanised steel doorset and a BS EN 1125 panic bar.
Replacing seized BS EN 179 push pads on staff-only exits in a factory or production building.

Which workplace rules apply to these doors?

For premises in Warwickshire, the Workplace Regulations 1992 set the basics: doors suitably constructed, swing doors giving a clear view through when closed, and maintenance under regulation 5. Under the Regulatory Reform (Fire Safety) Order 2005, an emergency exit door must open easily in the direction of travel and must not be locked or fastened so it cannot be opened immediately in an emergency.

Keeping your site running during the work

Most installations in Warwickshire can be phased so part of the site keeps working. We agree access routes, exclusion zones and any temporary security with you before the team arrives, and can work early mornings, evenings or weekends where the business needs it.

Guide prices for steel personnel and fire exit doors

Steel personnel and fire exit doors guide prices
Item	Guide price (ex VAT)
Steel personnel door, single	£845 – £1,795
Steel fire exit door with panic hardware	£1,095 – £2,395
Strip-out and disposal on replacement	£345 – £1,195 per door

Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.

Your questions about steel personnel and fire exit doors

How much is a steel personnel door in Warwickshire?

Our guide price is £845 to £1,795 ex VAT for a single steel personnel door, or £1,095 to £2,395 for a steel fire exit door with panic hardware, supplied and fitted. We confirm the fixed price for your Warwickshire premises in writing after a free survey.

Which fire exit hardware do we need at our Warwickshire site?

If members of the public or people unfamiliar with the exit may use it, panic hardware to BS EN 1125 is normally required. Exits used only by trained staff who know the door can use emergency devices to BS EN 179. If in doubt, choose BS EN 1125.

How long does it take to replace a steel door in Warwickshire?

Most single steel doorsets are fitted in a day, including removal of the old door, fixing the new frame and making good. Made-to-measure doorsets have a manufacturing lead time, which we confirm with the quote.

Towns in Warwickshire we cover

We cover 7 towns in Warwickshire for steel personnel and fire exit doors, including Warwick, Nuneaton, Rugby, Leamington Spa.

Other services in Warwickshire

More about Steel personnel and fire exit doors. Last updated 19 October 2026.