Sectional overhead doors in Bedworth

The short version

We can install sectional overhead doors in Bedworth and across Warwickshire, on new industrial units and as replacements for tired roller shutters. Every job starts with a free survey and ends with a commissioned, tested door.

Town: Bedworth
Postcode district: CV12
Area: Warwickshire
Survey: Free for new installations

Options for sectional overhead doors in Bedworth

Track layouts. Standard, low headroom, high lift and vertical lift tracks, chosen after measuring your headroom.
Insulated panels. Steel sandwich panels with a foam core keep heat in and noise out; thicker panels are available for temperature-controlled units.
Electric drives. Shaft-mounted motors with push-button, remote, loop or radar control, and inverter drives for high-cycle bays.
Vision panels. Add a row of vision panels or full-vision aluminium sections for daylight and a clear view of vehicles outside.
Safety devices. Every powered door is fitted with the safety functions its risk assessment needs and force-tested before handover.

Typical scopes of work

Supplying full-vision aluminium sections for a vehicle workshop door so technicians get daylight without opening the door.
Fitting a bank of insulated sectional doors to a new distribution unit, with high-lift tracks to clear sprinkler mains and lighting.
Renewing torsion springs and lift cables on a busy loading bay door, with higher-cycle springs where the usage justifies them.

Who is responsible for door safety at a site in Bedworth?

In England, two sets of duties meet at a powered door. The installer who supplies or motorises it must hand over a door that meets the Supply of Machinery (Safety) Regulations 2008, tested against BS EN 12453 and documented. The business in control of the premises must then maintain it: regulation 5 of the Workplace Regulations 1992 covers maintenance, and regulation 18 requires upward-opening doors to have a device that stops them falling back and powered doors to have features that prevent trapping.

How the work is organised

If your premises are leased, check whether the landlord needs to approve the work. We can provide drawings and product data for the landlord or managing agent before the order is placed.

Guide prices

Sectional overhead doors guide prices
Item	Guide price (ex VAT)
Sectional overhead door, 40 mm insulated, electric (to c. 4 × 4.5 m)	£3,495 – £8,495
Strip-out and disposal on replacement	£345 – £1,195 per door

Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.

Your questions about sectional overhead doors

Which safety devices does a powered sectional door in Bedworth need?

That comes from the risk assessment for your site, but typically a safety edge or light curtain, spring-break and cable-break protection and limited closing forces tested to BS EN 12453. Busy pedestrian routes may call for more.

How soon can a sectional door be fitted in Bedworth?

Sectional doors are made to measure, so the manufacturer's lead time sets the date. We confirm it with the quote, book installation around your operations and fit most single doors in a day once the opening is ready.

Will a sectional door reduce heating costs at our Bedworth premises?

An insulated, well-sealed sectional door loses much less heat than a single-skin shutter, and keeping it closed with fast electric operation helps further. Actual savings depend on your building, heating and how often the door is open.

Sectional overhead doors near Bedworth

Our teams cover Bedworth (CV12) and nearby Nuneaton, Coventry, Hinckley, along with the rest of Warwickshire.

Other services in Bedworth

More about Sectional overhead doors · industrial doors in Bedworth. Last updated 19 October 2026.