Insulated roller shutter doors in Bedworth

Quick answer

We can fit foam-filled insulated roller doors in Bedworth and across Warwickshire, from small service doors to wide goods openings, with the drive, seals and controls chosen for how each door is actually used.

Town: Bedworth
Postcode district: CV12
Area: Warwickshire
Survey: Free for new installations

Options that matter on site

Colour choice. Choose a colour to suit your building, with a matching hood over the coil if wanted.
Wind locks. Lath end locks for exposed or wide doors to stop the curtain blowing out.
Weather seals. Brush or rubber guide seals and a rubber bottom seal against draughts and rain.
Compact coil. No tracks under the roof: the door rolls up into a neat coil above the lintel.
Safety devices. Safety edges, photocells and anti-fall devices fitted as the risk assessment requires.

What this work can involve

Installing an insulated roller door with induction loop activation on a busy internal forklift route.
Renewing worn guide brushes, the head seal and the bottom-rail seal on an insulated roller door that lets in draughts.
Converting a hand-chained insulated roller door to electric operation with a safety edge and photocells.

Safety law for industrial doors in England

Industrial doors in Bedworth are covered by the same rules as the rest of Great Britain. On handover you should receive user instructions and, for a powered door, the conformity paperwork, because the installer is treated as the manufacturer when they assemble or motorise it. Afterwards, keeping the door in efficient working order is the occupier's job under the Workplace Regulations 1992 and PUWER 1998, which in practice means regular servicing and a written log.

Planning the work around your site

Electrical work is the part that most often delays a job. If a new or converted door needs a supply, we confirm the motor's requirement at quote stage so your electrician can provide an isolator in the right place before installation day.

Guide prices for insulated roller shutter doors

Insulated roller shutter doors guide prices
Item	Guide price (ex VAT)
Insulated roller door, electric (to c. 4 × 4 m)	£3,195 – £7,495
Strip-out and disposal on replacement	£345 – £1,195 per door

Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.

Insulated roller shutter doors in Bedworth: your questions

Do you repair insulated roller doors across Warwickshire?

Yes. We repair damaged laths, motors, guides and seals on most makes of insulated roller door across Warwickshire. Repair visits are chargeable, and planned servicing helps catch wear before a breakdown.

Does a powered insulated roller door in Bedworth need safety devices?

If the door closes automatically or can trap someone, yes. The risk assessment decides what is needed, typically a safety edge, photocells and closing forces tested to BS EN 12453, plus anti-fall protection on heavier curtains.

Will an insulated roller door cut heating bills at our Bedworth premises?

It loses much less heat than a single-skin shutter, especially with good seals and quick electric operation. How much you save depends on your building, heating system and how long the door stays open.

Insulated roller shutter doors near Bedworth

Working in Bedworth? We also take on jobs in Nuneaton, Coventry, Hinckley and across Warwickshire.

Other services in Bedworth

More about Insulated roller shutter doors · industrial doors in Bedworth. Last updated 19 October 2026.