In short
Insulated roller shutter doors for heated workshops, trade units and vehicle bays in Coventry. We survey the opening, check there is headroom for the coil and fit an electric door that keeps the warmth in and the weather out.
- Town
- Coventry
- Postcode district
- CV1
- Area
- West Midlands
- Survey
- Free for new installations
What we fit in Coventry
- Weather seals. Seals along the guides, head and bottom rail stop wind-driven rain and cold air getting in.
- Controls. Buttons, key switches, remotes, induction loops or radar to suit your traffic.
- Safety devices. Safety edges, photocells and anti-fall devices fitted as the risk assessment requires.
- Wind locks. Lath end locks for exposed or wide doors to stop the curtain blowing out.
- Colour choice. Choose a colour to suit your building, with a matching hood over the coil if wanted.
What this work can involve
- Replacing a corroded single-skin shutter on a heated workshop with an insulated roller door and radio remote control.
- Renewing worn guide brushes, the head seal and the bottom-rail seal on an insulated roller door that lets in draughts.
- Installing an insulated roller door with induction loop activation on a busy internal forklift route.
Powered door rules that apply in Coventry
Coventry is in England, where powered industrial doors fall under Great Britain's health and safety law. Whoever makes a door powered — including converting a manual door — usually takes on the manufacturer's duties under the Supply of Machinery (Safety) Regulations 2008: risk assessment, technical file, conformity marking and a Declaration of Conformity. Once it is in use, the employer or occupier must keep it safe under the Workplace (Health, Safety and Welfare) Regulations 1992 and PUWER 1998.
Access, phasing and timing
Electrical work is the part that most often delays a job. If a new or converted door needs a supply, we confirm the motor's requirement at quote stage so your electrician can provide an isolator in the right place before installation day.
Guide prices
| Item | Guide price (ex VAT) |
|---|---|
| Insulated roller door, electric (to c. 4 × 4 m) | £3,195 – £7,495 |
| Strip-out and disposal on replacement | £345 – £1,195 per door |
Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.
Frequently asked questions
How much does an insulated roller shutter door cost in Coventry?
Our guide price for an electric insulated roller door up to about 4 × 4 m is £3,195 to £7,495 ex VAT, supplied and fitted. We survey your Coventry opening free of charge and then put a fixed price in writing.
Can you replace our old roller shutter in Coventry with an insulated one?
Yes. We recommend a complete new door rather than a new curtain on old parts, and include strip-out and disposal in the quote so the old shutter goes when the new one is fitted.
Do you repair insulated roller doors across the West Midlands?
Yes. We repair damaged laths, motors, guides and seals on most makes of insulated roller door across the West Midlands. Repair visits are chargeable, and planned servicing helps catch wear before a breakdown.
Insulated roller shutter doors near Coventry
Besides Coventry, we can survey and quote for sites in Kenilworth, Bedworth, Nuneaton and the rest of the West Midlands.
- Insulated roller shutter doors in Kenilworth
- Insulated roller shutter doors in Bedworth
- Insulated roller shutter doors in Nuneaton
- Insulated roller shutter doors in Leamington Spa
- Insulated roller shutter doors in Warwick
- Insulated roller shutter doors in Rugby
Other services in Coventry
- Industrial roller shutters
- Industrial door repairs
- Fire shutters
- High-speed doors
- Dock levellers
- Bollards and door protection
- Planned maintenance contracts
- Impact traffic doors
More about Insulated roller shutter doors · industrial doors in Coventry. Last updated 19 October 2026.