Insulated roller shutter doors in Warwick

Quick answer

We can fit foam-filled insulated roller doors in Warwick and across Warwickshire, from small service doors to wide goods openings, with the drive, seals and controls chosen for how each door is actually used.

Town: Warwick
Postcode district: CV34
Area: Warwickshire
Survey: Free for new installations

Options that matter on site

Controls. From a simple button station to loops and radar, the controls match how often the door opens.
Wind locks. On exposed elevations, wind locks hook the laths into the guides so gusts cannot push the curtain out.
Electric drive. Tubular or external geared motors with a manual override for power cuts.
Weather seals. Seals along the guides, head and bottom rail stop wind-driven rain and cold air getting in.
Compact coil. The curtain coils above the opening, leaving ceilings free for lights and sprinklers.

Examples of work we can quote for

Renewing worn guide brushes, the head seal and the bottom-rail seal on an insulated roller door that lets in draughts.
Replacing a corroded single-skin shutter on a heated workshop with an insulated roller door and radio remote control.
Installing an insulated roller door with induction loop activation on a busy internal forklift route.

Who is responsible for door safety at a site in Warwick?

In England, two sets of duties meet at a powered door. The installer who supplies or motorises it must hand over a door that meets the Supply of Machinery (Safety) Regulations 2008, tested against BS EN 12453 and documented. The business in control of the premises must then maintain it: regulation 5 of the Workplace Regulations 1992 covers maintenance, and regulation 18 requires upward-opening doors to have a device that stops them falling back and powered doors to have features that prevent trapping.

Planning the work around your site

Sites in and around Warwick vary from tight trade counters to large distribution yards. The survey records access for our vehicle and platform, overhead obstructions and floor condition so the installation day runs without surprises.

Guide prices

Insulated roller shutter doors guide prices
Item	Guide price (ex VAT)
Insulated roller door, electric (to c. 4 × 4 m)	£3,195 – £7,495
Strip-out and disposal on replacement	£345 – £1,195 per door

Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.

Your questions about insulated roller shutter doors

Can you replace our old roller shutter in Warwick with an insulated one?

Yes. We recommend a complete new door rather than a new curtain on old parts, and include strip-out and disposal in the quote so the old shutter goes when the new one is fitted.

Does a powered insulated roller door in Warwick need safety devices?

If the door closes automatically or can trap someone, yes. The risk assessment decides what is needed, typically a safety edge, photocells and closing forces tested to BS EN 12453, plus anti-fall protection on heavier curtains.

Is there enough headroom for an insulated roller door at our Warwick unit?

The coil on an insulated curtain is larger than on a single-skin shutter, so we measure the space above the lintel on survey. Where headroom is very tight, the coil can sometimes be fitted outside the opening or a lower-profile option chosen.

Insulated roller shutter doors near Warwick

Besides Warwick, we can survey and quote for sites in Leamington Spa, Kenilworth, Stratford-upon-Avon and the rest of Warwickshire.

Other services in Warwick

More about Insulated roller shutter doors · industrial doors in Warwick. Last updated 19 October 2026.