Insulated roller shutter doors in Shirley

In short

Replacing a draughty roller shutter in Shirley? We remove the old door, fit an insulated curtain with new guides, seals and motor, and hand over a tested, commissioned door with all of its paperwork.

Town: Shirley
Postcode district: B90
Area: West Midlands
Survey: Free for new installations

What to specify

Foam-filled laths. Each lath has two metal skins with insulating foam between them, so the curtain holds heat far better.
Safety devices. Safety edges, photocells and anti-fall devices fitted as the risk assessment requires.
Controls. From a simple button station to loops and radar, the controls match how often the door opens.
Wind locks. Lath end locks for exposed or wide doors to stop the curtain blowing out.
Electric drive. Motor inside the barrel or on its end, with a chain or handle so the door still opens without power.

What this work can involve

Fitting an insulated roller door to a trade counter unit where sprinkler mains leave no room for sectional door tracks.
Replacing a corroded single-skin shutter on a heated workshop with an insulated roller door and radio remote control.
Supplying insulated roller doors in one matching RAL colour across a terrace of refurbished small business units.

Safety law for industrial doors in England

Industrial doors in Shirley are covered by the same rules as the rest of Great Britain. On handover you should receive user instructions and, for a powered door, the conformity paperwork, because the installer is treated as the manufacturer when they assemble or motorise it. Afterwards, keeping the door in efficient working order is the occupier's job under the Workplace Regulations 1992 and PUWER 1998, which in practice means regular servicing and a written log.

Planning the work around your site

Electrical work is the part that most often delays a job. If a new or converted door needs a supply, we confirm the motor's requirement at quote stage so your electrician can provide an isolator in the right place before installation day.

Prices for insulated roller shutter doors in Shirley

Insulated roller shutter doors guide prices
Item	Guide price (ex VAT)
Insulated roller door, electric (to c. 4 × 4 m)	£3,195 – £7,495
Strip-out and disposal on replacement	£345 – £1,195 per door

Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.

Your questions about insulated roller shutter doors

How much does an insulated roller shutter door cost in Shirley?

Our guide price for an electric insulated roller door up to about 4 × 4 m is £3,195 to £7,495 ex VAT, supplied and fitted. We survey your Shirley opening free of charge and then put a fixed price in writing.

Does a powered insulated roller door in Shirley need safety devices?

If the door closes automatically or can trap someone, yes. The risk assessment decides what is needed, typically a safety edge, photocells and closing forces tested to BS EN 12453, plus anti-fall protection on heavier curtains.

Can you replace our old roller shutter in Shirley with an insulated one?

Yes. We recommend a complete new door rather than a new curtain on old parts, and include strip-out and disposal in the quote so the old shutter goes when the new one is fitted.

Insulated roller shutter doors near Shirley

Our teams cover Shirley (B90) and nearby Solihull, Birmingham, Smethwick, along with the rest of the West Midlands.

Other services in Shirley

More about Insulated roller shutter doors · industrial doors in Shirley. Last updated 19 October 2026.