Hangar and large-span doors in Worcester

In short

If your sliding hangar doors in Worcester have become heavy, noisy or hard to move, we can renew wheels, guides and drives, or replace the doors with a modern large-span system if refurbishment no longer makes sense.

Town: Worcester
Postcode district: WR1
Area: Worcestershire
Survey: Free for new installations

What to specify

Safety systems. Edge protection, photocells, warning lights, sounders and interlocks.
Drives and controls. Powered leaves with controls to suit the site, plus a way to move the door if power is lost.
Load path. We decide with your structural engineer whether the slab or the structure carries the door's weight.
Designed per opening. Each door engineered around the opening size, structure and site wind exposure.
Refurbishment. Sound but tired doors can be brought back with new running gear, drives and safety devices.

Examples of work we can quote for

Designing multi-leaf sliding doors, with a tail-fin cut-out where needed, for a hangar or large-span maintenance building.
Refurbishing manual large-span sliding doors with new bottom wheels, top guides and an electric drive unit on each leaf.
Installing heavy-duty sectional doors with wind-resistant panels across the frontage of a bus or coach garage.

Who is responsible for door safety at a site in Worcester?

In England, two sets of duties meet at a powered door. The installer who supplies or motorises it must hand over a door that meets the Supply of Machinery (Safety) Regulations 2008, tested against BS EN 12453 and documented. The business in control of the premises must then maintain it: regulation 5 of the Workplace Regulations 1992 covers maintenance, and regulation 18 requires upward-opening doors to have a device that stops them falling back and powered doors to have features that prevent trapping.

Planning the work around your site

For busy sites in Worcestershire the work can be split across visits — preparation and framing first, door installation and commissioning second — so the opening is only out of action for the shortest time.

Prices for hangar and large-span doors in Worcester

Hangar and large-span doors guide prices
Item	Guide price (ex VAT)
Hangar and large-span doors	on survey (typically from £39,995)

Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.

Your questions about hangar and large-span doors

How much does a hangar door cost in Worcester?

Hangar and large-span doors are priced on survey because each is designed for its opening and structure. Typical projects start from around £39,995 ex VAT. After surveying your site in Worcester, we confirm a fixed price in writing.

How long would a large-span door installation take in Worcester?

After design and manufacture, installation typically takes from several days to a few weeks depending on the number of leaves and any structural work. The full programme is set out with the quote.

Do you work on hangar door projects with our engineer in Worcester?

Yes. We coordinate loads, fixings, floor rails and steelwork with your structural engineer and main contractor so the door and the building are designed together, and we agree a programme before manufacture.

Hangar and large-span doors near Worcester

Working in Worcester? We also take on jobs in Droitwich, Malvern, Stourport-on-Severn and across Worcestershire.

Other services in Worcester

More about Hangar and large-span doors · industrial doors in Worcester. Last updated 19 October 2026.