Industrial roller shutters in Worcester

In short

We can fit new steel roller shutters and replace old, damaged ones in Worcester and across Worcestershire, with strip-out, disposal and any new framing priced up front after a free site survey.

Town: Worcester
Postcode district: WR1
Area: Worcestershire
Survey: Free for new installations

What to specify

Safety devices. Safety edges, photocells and anti-fall devices on powered shutters.
Manual override. Powered shutters keep a chain or handle override so they open without power.
Manual or electric. Hand-operated for occasional use, electric for anything opened through the working day.
Compact coil. The curtain winds onto a barrel above the opening, leaving floor and roof space free.
Mounting options. Fixed inside, in the reveal or face-fixed outside with a protective hood.

What this work can involve

Fitting a galvanised roller shutter to a new bin store or recycling compound, with a lockable bottom rail.
Supplying a security-rated roller shutter, installed to the certified specification, to meet an insurer's requirement for a high-value stockroom.
Converting hand-chained shutters on a storage unit to electric operation with key-switch controls and safety edges.

Safety law for industrial doors in England

Industrial doors in Worcester are covered by the same rules as the rest of Great Britain. On handover you should receive user instructions and, for a powered door, the conformity paperwork, because the installer is treated as the manufacturer when they assemble or motorise it. Afterwards, keeping the door in efficient working order is the occupier's job under the Workplace Regulations 1992 and PUWER 1998, which in practice means regular servicing and a written log.

How the work is organised

Sites in and around Worcester vary from tight trade counters to large distribution yards. The survey records access for our vehicle and platform, overhead obstructions and floor condition so the installation day runs without surprises.

Guide prices for industrial roller shutters

Industrial roller shutters guide prices
Item	Guide price (ex VAT)
Industrial roller shutter, single-skin steel, electric (to c. 4 × 4 m)	£2,395 – £5,495
Manual-to-electric conversion	£1,195 – £3,195
Strip-out and disposal on replacement	£345 – £1,195 per door

Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.

Your questions about industrial roller shutters

Does an electric roller shutter at our Worcester site need safety devices?

It depends on the risk assessment. A hold-to-run shutter in view of the operator may need little more than force limiting, while one that closes automatically typically needs a safety edge and photocells, tested to BS EN 12453.

Can you convert our manual shutter in Worcester to electric?

Often, yes, if the barrel, curtain and guides are in good condition. Our guide price for a conversion is £1,195 to £3,195 ex VAT. We become responsible for the conformity paperwork on the converted door and fit the safety devices it needs.

How much is an industrial roller shutter in Worcester?

An electric single-skin steel roller shutter up to about 4 × 4 m has a guide price of £2,395 to £5,495 ex VAT, supplied and fitted. After a free survey in Worcester, we confirm a fixed price for your opening in writing.

Industrial roller shutters near Worcester

Our teams cover Worcester (WR1) and nearby Droitwich, Malvern, Stourport-on-Severn, along with the rest of Worcestershire.

Other services in Worcester

More about Industrial roller shutters · industrial doors in Worcester. Last updated 19 October 2026.