Industrial roller shutters in Ledbury

The short version

We can fit new steel roller shutters and replace old, damaged ones in Ledbury and across Herefordshire, with strip-out, disposal and any new framing priced up front after a free site survey.

Town: Ledbury
Postcode district: HR8
Area: Herefordshire
Survey: Free for new installations

Options that matter on site

Manual override. Powered shutters keep a chain or handle override so they open without power.
Manual or electric. Push-up, chain hoist or motorised operation depending on how often the door opens.
Mounting options. Fixed inside, in the reveal or face-fixed outside with a protective hood.
Steel curtains. Heavier lath gauges for wide or exposed doors; lighter profiles where space and budget are tight.
Compact coil. The curtain winds onto a barrel above the opening, leaving floor and roof space free.

Examples of work we can quote for

Fitting a galvanised roller shutter to a new bin store or recycling compound, with a lockable bottom rail.
Face-fixing a roller shutter with a steel hood where internal racking leaves no room behind the opening.
Installing perforated shutters across a covered loading area so the space stays ventilated and visible when locked.

Who is responsible for door safety at a site in Ledbury?

In England, two sets of duties meet at a powered door. The installer who supplies or motorises it must hand over a door that meets the Supply of Machinery (Safety) Regulations 2008, tested against BS EN 12453 and documented. The business in control of the premises must then maintain it: regulation 5 of the Workplace Regulations 1992 covers maintenance, and regulation 18 requires upward-opening doors to have a device that stops them falling back and powered doors to have features that prevent trapping.

Access, phasing and timing

Electrical work is the part that most often delays a job. If a new or converted door needs a supply, we confirm the motor's requirement at quote stage so your electrician can provide an isolator in the right place before installation day.

Budgeting for industrial roller shutters in Ledbury

Industrial roller shutters guide prices
Item	Guide price (ex VAT)
Industrial roller shutter, single-skin steel, electric (to c. 4 × 4 m)	£2,395 – £5,495
Manual-to-electric conversion	£1,195 – £3,195
Strip-out and disposal on replacement	£345 – £1,195 per door

Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.

Frequently asked questions

Does an electric roller shutter at our Ledbury site need safety devices?

It depends on the risk assessment. A hold-to-run shutter in view of the operator may need little more than force limiting, while one that closes automatically typically needs a safety edge and photocells, tested to BS EN 12453.

Can you supply security-rated shutters in Ledbury?

Yes. Where your insurer asks for a rating such as LPS 1175, we supply a shutter whose manufacturer holds that certification and install it to the certified specification. Check the exact rating your insurer wants before ordering.

Do you repair roller shutters across Herefordshire?

Yes. We repair most makes of roller shutter across Herefordshire, including motors, laths, guides, springs and bottom rails. Repair visits are chargeable and priced in advance; we quote before any larger repair.

Industrial roller shutters near Ledbury

Our teams cover Ledbury (HR8) and nearby Malvern, Ross-on-Wye, Tewkesbury, along with the rest of Herefordshire.

Other services in Ledbury

More about Industrial roller shutters · industrial doors in Ledbury. Last updated 19 October 2026.