Insulated roller shutter doors in Ledbury

The short version

Replacing a draughty roller shutter in Ledbury? We remove the old door, fit an insulated curtain with new guides, seals and motor, and hand over a tested, commissioned door with all of its paperwork.

Town: Ledbury
Postcode district: HR8
Area: Herefordshire
Survey: Free for new installations

Options for insulated roller shutter doors in Ledbury

Safety devices. Every powered door gets the safety functions its risk assessment calls for and is tested before handover.
Controls. From a simple button station to loops and radar, the controls match how often the door opens.
Compact coil. No tracks under the roof: the door rolls up into a neat coil above the lintel.
Electric drive. Motor inside the barrel or on its end, with a chain or handle so the door still opens without power.
Colour choice. Choose a colour to suit your building, with a matching hood over the coil if wanted.

Typical scopes of work

Installing an insulated roller door with induction loop activation on a busy internal forklift route.
Adding wind locks and a heavier geared motor to a wide insulated roller door on an exposed elevation.
Renewing worn guide brushes, the head seal and the bottom-rail seal on an insulated roller door that lets in draughts.

Who is responsible for door safety at a site in Ledbury?

In England, two sets of duties meet at a powered door. The installer who supplies or motorises it must hand over a door that meets the Supply of Machinery (Safety) Regulations 2008, tested against BS EN 12453 and documented. The business in control of the premises must then maintain it: regulation 5 of the Workplace Regulations 1992 covers maintenance, and regulation 18 requires upward-opening doors to have a device that stops them falling back and powered doors to have features that prevent trapping.

Access, phasing and timing

For busy sites in Herefordshire the work can be split across visits — preparation and framing first, door installation and commissioning second — so the opening is only out of action for the shortest time.

Guide prices for insulated roller shutter doors

Insulated roller shutter doors guide prices
Item	Guide price (ex VAT)
Insulated roller door, electric (to c. 4 × 4 m)	£3,195 – £7,495
Strip-out and disposal on replacement	£345 – £1,195 per door

Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.

Insulated roller shutter doors in Ledbury: your questions

Do you repair insulated roller doors across Herefordshire?

Yes. We repair damaged laths, motors, guides and seals on most makes of insulated roller door across Herefordshire. Repair visits are chargeable, and planned servicing helps catch wear before a breakdown.

How much does an insulated roller shutter door cost in Ledbury?

Our guide price for an electric insulated roller door up to about 4 × 4 m is £3,195 to £7,495 ex VAT, supplied and fitted. We survey your Ledbury opening free of charge and then put a fixed price in writing.

Does a powered insulated roller door in Ledbury need safety devices?

If the door closes automatically or can trap someone, yes. The risk assessment decides what is needed, typically a safety edge, photocells and closing forces tested to BS EN 12453, plus anti-fall protection on heavier curtains.

Insulated roller shutter doors near Ledbury

Ledbury is in the HR8 postcode district in Herefordshire. We also cover Malvern, Ross-on-Wye, Tewkesbury.

Other services in Ledbury

More about Insulated roller shutter doors · industrial doors in Ledbury. Last updated 19 October 2026.