Insulated roller shutter doors in Tewkesbury

In short

Insulated roller doors suit premises in Tewkesbury that need better thermal performance without giving up roof space. We supply, fit and commission them, and can service them afterwards on a schedule.

Town: Tewkesbury
Postcode district: GL20
Area: Gloucestershire
Survey: Free for new installations

What we fit in Tewkesbury

Controls. Buttons, key switches, remotes, induction loops or radar to suit your traffic.
Weather seals. Brush or rubber guide seals and a rubber bottom seal against draughts and rain.
Wind locks. Lath end locks for exposed or wide doors to stop the curtain blowing out.
Safety devices. Every powered door gets the safety functions its risk assessment calls for and is tested before handover.
Foam-filled laths. Each lath has two metal skins with insulating foam between them, so the curtain holds heat far better.

What this work can involve

Fitting a compact insulated service door to a plant room to reduce the noise reaching neighbouring offices.
Installing an insulated roller door with induction loop activation on a busy internal forklift route.
Adding wind locks and a heavier geared motor to a wide insulated roller door on an exposed elevation.

Who is responsible for door safety at a site in Tewkesbury?

In England, two sets of duties meet at a powered door. The installer who supplies or motorises it must hand over a door that meets the Supply of Machinery (Safety) Regulations 2008, tested against BS EN 12453 and documented. The business in control of the premises must then maintain it: regulation 5 of the Workplace Regulations 1992 covers maintenance, and regulation 18 requires upward-opening doors to have a device that stops them falling back and powered doors to have features that prevent trapping.

Keeping your site running during the work

Downtime matters on a working site, so the programme is set around your shifts. For a single door the opening is usually needed for a day; multi-door jobs are done one bay at a time so deliveries keep moving.

Guide prices for insulated roller shutter doors

Insulated roller shutter doors guide prices
Item	Guide price (ex VAT)
Insulated roller door, electric (to c. 4 × 4 m)	£3,195 – £7,495
Strip-out and disposal on replacement	£345 – £1,195 per door

Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.

Insulated roller shutter doors in Tewkesbury: your questions

How long does insulated roller door installation take in Tewkesbury?

Most single doors are fitted and commissioned in a day once the made-to-measure door has arrived. The manufacturer's lead time is confirmed with your quote so you can plan around it.

Does a powered insulated roller door in Tewkesbury need safety devices?

If the door closes automatically or can trap someone, yes. The risk assessment decides what is needed, typically a safety edge, photocells and closing forces tested to BS EN 12453, plus anti-fall protection on heavier curtains.

Can you replace our old roller shutter in Tewkesbury with an insulated one?

Yes. We recommend a complete new door rather than a new curtain on old parts, and include strip-out and disposal in the quote so the old shutter goes when the new one is fitted.

Insulated roller shutter doors near Tewkesbury

Besides Tewkesbury, we can survey and quote for sites in Cheltenham, Gloucester, Malvern and the rest of Gloucestershire.

Other services in Tewkesbury

More about Insulated roller shutter doors · industrial doors in Tewkesbury. Last updated 19 October 2026.