Industrial roller shutters in Tewkesbury

In short

From bin stores to goods-in openings, we can install industrial roller shutters at premises in Tewkesbury, set up powered shutters to BS EN 12453 and leave you with the paperwork for your files.

Town: Tewkesbury
Postcode district: GL20
Area: Gloucestershire
Survey: Free for new installations

What we fit in Tewkesbury

Colour finishes. Leave it galvanised or choose a colour that matches the building.
Compact coil. The curtain winds onto a barrel above the opening, leaving floor and roof space free.
Safety devices. Safety edges, photocells and anti-fall devices on powered shutters.
Security. Bottom-rail locks and shoot bolts, with LPS 1175 rated products available.
Manual override. If the power fails, the shutter can still be wound open by hand.

Examples of work we can quote for

Supplying a security-rated roller shutter, installed to the certified specification, to meet an insurer's requirement for a high-value stockroom.
Replacing a vehicle-damaged shutter in a trade yard with a heavier-gauge curtain and guide-rail protection.
Converting hand-chained shutters on a storage unit to electric operation with key-switch controls and safety edges.

Powered door rules that apply in Tewkesbury

Tewkesbury is in England, where powered industrial doors fall under Great Britain's health and safety law. Whoever makes a door powered — including converting a manual door — usually takes on the manufacturer's duties under the Supply of Machinery (Safety) Regulations 2008: risk assessment, technical file, conformity marking and a Declaration of Conformity. Once it is in use, the employer or occupier must keep it safe under the Workplace (Health, Safety and Welfare) Regulations 1992 and PUWER 1998.

Keeping your site running during the work

Electrical work is the part that most often delays a job. If a new or converted door needs a supply, we confirm the motor's requirement at quote stage so your electrician can provide an isolator in the right place before installation day.

Guide prices

Industrial roller shutters guide prices
Item	Guide price (ex VAT)
Industrial roller shutter, single-skin steel, electric (to c. 4 × 4 m)	£2,395 – £5,495
Manual-to-electric conversion	£1,195 – £3,195
Strip-out and disposal on replacement	£345 – £1,195 per door

Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.

Questions from businesses in Tewkesbury

Does an electric roller shutter at our Tewkesbury site need safety devices?

It depends on the risk assessment. A hold-to-run shutter in view of the operator may need little more than force limiting, while one that closes automatically typically needs a safety edge and photocells, tested to BS EN 12453.

Can you convert our manual shutter in Tewkesbury to electric?

Often, yes, if the barrel, curtain and guides are in good condition. Our guide price for a conversion is £1,195 to £3,195 ex VAT. We become responsible for the conformity paperwork on the converted door and fit the safety devices it needs.

Do you remove old shutters at sites in Tewkesbury?

Yes. Strip-out and disposal of the old shutter is shown as a separate line in the quote, along with any repairs to the opening. The old door normally comes out as part of the same visit that fits the new one.

Industrial roller shutters near Tewkesbury

Our teams cover Tewkesbury (GL20) and nearby Cheltenham, Gloucester, Malvern, along with the rest of Gloucestershire.

Other services in Tewkesbury

More about Industrial roller shutters · industrial doors in Tewkesbury. Last updated 19 October 2026.