In short
We can carry out safety upgrades and force testing on industrial doors in Ledbury and across Herefordshire, recording every result for your maintenance file and updating each door's risk assessment to match.
- Town
- Ledbury
- Postcode district
- HR8
- Area
- Herefordshire
- Survey
- Free for new installations
What to specify
- Warning devices. Beacons, sounders and traffic lights to warn people of a moving door.
- Light curtains. Many beams from floor to head detect people and vehicles anywhere in the opening.
- Force testing. Closing forces measured against BS EN 12453 limits and recorded.
- Photocells. Beams across the opening that stop the door closing while broken.
- Safety edges. Edges on the closing rail detect contact and send the door back up.
Typical scopes of work
- Adding warning beacons and photocells to a door that is being converted to automatic closing on a timer.
- Force-testing a run of loading bay doors and adjusting closing speeds where results exceed the limits.
- Adding anti-fall devices to heavy roller shutters identified in a workplace risk assessment review.
Safety law for industrial doors in England
Industrial doors in Ledbury are covered by the same rules as the rest of Great Britain. On handover you should receive user instructions and, for a powered door, the conformity paperwork, because the installer is treated as the manufacturer when they assemble or motorise it. Afterwards, keeping the door in efficient working order is the occupier's job under the Workplace Regulations 1992 and PUWER 1998, which in practice means regular servicing and a written log.
How the work is organised
Where a door is being replaced, the opening has to be made secure at the end of each day. We plan strip-out, any new framing and the new door so the gap is never left open overnight unless you have agreed temporary measures.
Guide prices for door safety upgrades
| Item | Guide price (ex VAT) |
|---|---|
| Safety upgrade (edges, photocells, light curtain) | £445 – £1,795 per door |
| Repair visit (attendance and first hour) | £145 – £195 |
Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.
Questions from businesses in Ledbury
Can you force-test our doors in Ledbury?
Yes. We measure closing forces with a calibrated tester at the points set out in BS EN 12453, record the results and recommend any adjustments or devices needed. Force testing can be part of a service visit.
Do you upgrade doors from other installers across Herefordshire?
Yes. We upgrade safety devices on most makes of powered door across Herefordshire, whoever installed them, checking that new devices are compatible with the existing control panel and replacing the panel where needed.
Our door at our Ledbury site has a bypassed safety edge. What should we do?
Stop using the door under power until the safety device is working, or use it on hold-to-run only if the risk assessment allows. We can replace the edge or fit alternative detection and re-test the door.
Door safety upgrades near Ledbury
Besides Ledbury, we can survey and quote for sites in Malvern, Ross-on-Wye, Tewkesbury and the rest of Herefordshire.
- Door safety upgrades in Malvern
- Door safety upgrades in Ross-on-Wye
- Door safety upgrades in Tewkesbury
- Door safety upgrades in Hereford
- Door safety upgrades in Worcester
- Door safety upgrades in Gloucester
Other services in Ledbury
- Fire shutters
- PVC strip curtains
- Industrial door repairs
- Bollards and door protection
- Fire shutter servicing and drop tests
- Sectional overhead doors
- Complete loading bays
- Steel personnel and fire exit doors
More about Door safety upgrades · industrial doors in Ledbury. Last updated 19 October 2026.