Door safety upgrades in Gloucester

Quick answer

Door safety upgrades for powered roller shutters, sectional doors and sliding doors in Gloucester. We force-test the door, assess how it is used and fit the safety edges, photocells or light curtains it needs.

Town: Gloucester
Postcode district: GL1
Area: Gloucestershire
Survey: Free for new installations

Options that matter on site

Records. Written results and updated risk assessment for your files.
Force testing. We measure how hard the door closes and record the results at each test point.
Light curtains. Many beams from floor to head detect people and vehicles anywhere in the opening.
Safety edges. Edges on the closing rail detect contact and send the door back up.
Photocells. If something breaks the beam, the door will not close.

What this work can involve

Carrying out safety upgrades on the powered doors of a newly leased unit before a tenant moves in.
Fitting spring-break and cable-break devices to older sectional doors installed without any fall protection.
Adding warning beacons and photocells to a door that is being converted to automatic closing on a timer.

Who is responsible for door safety at a site in Gloucester?

In England, two sets of duties meet at a powered door. The installer who supplies or motorises it must hand over a door that meets the Supply of Machinery (Safety) Regulations 2008, tested against BS EN 12453 and documented. The business in control of the premises must then maintain it: regulation 5 of the Workplace Regulations 1992 covers maintenance, and regulation 18 requires upward-opening doors to have a device that stops them falling back and powered doors to have features that prevent trapping.

Access, phasing and timing

Sites in and around Gloucester vary from tight trade counters to large distribution yards. The survey records access for our vehicle and platform, overhead obstructions and floor condition so the installation day runs without surprises.

Budgeting for door safety upgrades in Gloucester

Door safety upgrades guide prices
Item	Guide price (ex VAT)
Safety upgrade (edges, photocells, light curtain)	£445 – £1,795 per door
Repair visit (attendance and first hour)	£145 – £195

Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.

Questions from businesses in Gloucester

Do you upgrade doors from other installers across Gloucestershire?

Yes. We upgrade safety devices on most makes of powered door across Gloucestershire, whoever installed them, checking that new devices are compatible with the existing control panel and replacing the panel where needed.

How long does a safety upgrade take in Gloucester?

Most upgrades take a few hours per door, including re-testing. If a new control panel is needed, it may take longer. We plan work to keep doors out of use for as short a time as possible.

How much does a door safety upgrade cost in Gloucester?

Our guide price is £445 to £1,795 ex VAT per door for safety edges, photocells or a light curtain, depending on door size and devices. A new control panel or fall protection adds to it. We confirm the fixed price after a survey and force test in Gloucester.

Door safety upgrades near Gloucester

Our teams cover Gloucester (GL1) and nearby Cheltenham, Stroud, Tewkesbury, along with the rest of Gloucestershire.

Other services in Gloucester

More about Door safety upgrades · industrial doors in Gloucester. Last updated 19 October 2026.