Industrial door replacement in Ledbury

Quick answer

Each door replacement in Ledbury starts with a free survey and a written fixed price that lists the new door, strip-out, disposal and any opening repairs as separate lines.

Town: Ledbury
Postcode district: HR8
Area: Herefordshire
Survey: Free for new installations

What we fit in Ledbury

Commissioning. Safety devices tested, forces measured and instructions handed over.
Free survey. We inspect the old door and measure the opening at no cost before quoting.
Disposal. Old doors taken away for recycling or disposal.
Safe strip-out. Tensioned springs and heavy parts are removed by trained engineers.
Minimal downtime. Made-to-measure door ordered first so the swap takes a day.

Typical scopes of work

Replacing a busy internal shutter with a high-speed fabric door so the opening is no longer left standing open.
Stripping out a sectional door with broken springs and an obsolete motor, and fitting a new door with an inverter drive.
Replacing vehicle-damaged roller shutters on a block of small industrial units between tenancies.

Powered door rules that apply in Ledbury

Ledbury is in England, where powered industrial doors fall under Great Britain's health and safety law. Whoever makes a door powered — including converting a manual door — usually takes on the manufacturer's duties under the Supply of Machinery (Safety) Regulations 2008: risk assessment, technical file, conformity marking and a Declaration of Conformity. Once it is in use, the employer or occupier must keep it safe under the Workplace (Health, Safety and Welfare) Regulations 1992 and PUWER 1998.

Planning the work around your site

Downtime matters on a working site, so the programme is set around your shifts. For a single door the opening is usually needed for a day; multi-door jobs are done one bay at a time so deliveries keep moving.

Budgeting for industrial door replacement in Ledbury

Industrial door replacement guide prices
Item	Guide price (ex VAT)
Strip-out and disposal on replacement	£345 – £1,195 per door
Industrial roller shutter, single-skin steel, electric (to c. 4 × 4 m)	£2,395 – £5,495
Sectional overhead door, 40 mm insulated, electric (to c. 4 × 4.5 m)	£3,495 – £8,495

Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.

Industrial door replacement in Ledbury: your questions

How much does industrial door replacement cost in Ledbury?

Strip-out and disposal has a guide price of £345 to £1,195 ex VAT per door, plus the new door, for example £2,395 to £5,495 for an electric single-skin roller shutter. We confirm the full fixed price in writing after a free survey in Ledbury.

Do you replace doors at multiple sites across Herefordshire?

Yes. We replace doors across Herefordshire, including planned programmes covering several sites or a whole run of units, phased so that each site keeps operating normally while its doors are being changed.

How long will our opening in Ledbury be out of use?

The new door is made to measure before the old one is removed, so a single door is usually stripped out and replaced in a day, with the opening secured again by the end of the visit.

Industrial door replacement near Ledbury

Working in Ledbury? We also take on jobs in Malvern, Ross-on-Wye, Tewkesbury and across Herefordshire.

Other services in Ledbury

More about Industrial door replacement · industrial doors in Ledbury. Last updated 19 October 2026.