Industrial door replacement in Malvern

At a glance

Replacing a door at a unit in Malvern (WR14) is a chance to upgrade: insulated instead of single skin, electric instead of manual, or high-speed where the opening is busy.

Town: Malvern
Postcode district: WR14
Area: Worcestershire
Survey: Free for new installations

Options that matter on site

Right door type. Replace with the same type or move to a door that suits your current needs.
Opening repairs. Damaged jambs and heads repaired or new framing fitted.
Safe strip-out. Tensioned springs and heavy parts are removed by trained engineers.
Disposal. We take the old door away so there is nothing left on site to deal with.
Commissioning. Safety devices tested, forces measured and instructions handed over.

Typical scopes of work

Removing a rotted timber frame and fitting new steel jambs before installing a replacement roller shutter.
Phasing the replacement of several loading doors so only one bay is out of use at a time.
Replacing vehicle-damaged roller shutters on a block of small industrial units between tenancies.

Safety law for industrial doors in England

Industrial doors in Malvern are covered by the same rules as the rest of Great Britain. On handover you should receive user instructions and, for a powered door, the conformity paperwork, because the installer is treated as the manufacturer when they assemble or motorise it. Afterwards, keeping the door in efficient working order is the occupier's job under the Workplace Regulations 1992 and PUWER 1998, which in practice means regular servicing and a written log.

Keeping your site running during the work

Most installations in Malvern can be phased so part of the site keeps working. We agree access routes, exclusion zones and any temporary security with you before the team arrives, and can work early mornings, evenings or weekends where the business needs it.

Budgeting for industrial door replacement in Malvern

Industrial door replacement guide prices
Item	Guide price (ex VAT)
Strip-out and disposal on replacement	£345 – £1,195 per door
Industrial roller shutter, single-skin steel, electric (to c. 4 × 4 m)	£2,395 – £5,495
Sectional overhead door, 40 mm insulated, electric (to c. 4 × 4.5 m)	£3,495 – £8,495

Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.

Your questions about industrial door replacement

How much does industrial door replacement cost in Malvern?

Strip-out and disposal has a guide price of £345 to £1,195 ex VAT per door, plus the new door, for example £2,395 to £5,495 for an electric single-skin roller shutter. We confirm the full fixed price in writing after a free survey in Malvern.

How long will our opening in Malvern be out of use?

The new door is made to measure before the old one is removed, so a single door is usually stripped out and replaced in a day, with the opening secured again by the end of the visit.

Can we change door type when replacing at our Malvern unit?

Usually, yes, subject to headroom, side room and back room. Common upgrades are single-skin to insulated, manual to electric and conventional to high-speed. We check the space and the structure on survey before recommending a door type.

Industrial door replacement near Malvern

Malvern is in the WR14 postcode district in Worcestershire. We also cover Ledbury, Worcester, Tewkesbury.

Other services in Malvern

More about Industrial door replacement · industrial doors in Malvern. Last updated 19 October 2026.