Sliding and folding industrial doors in Ledbury

The short version

Sliding and folding industrial doors for farms, workshops, vehicle sheds and wide-span buildings in Ledbury. We survey the opening and the structure, then recommend a top-hung or bottom-rolling layout that suits it.

Town: Ledbury
Postcode district: HR8
Area: Herefordshire
Survey: Free for new installations

Options for sliding and folding industrial doors in Ledbury

Wide spans. Openings of almost any width split into as many leaves as needed.
Insulated options. Leaves can be filled with insulated panels and sealed along their edges to cut heat loss.
Wicket doors. A personnel door within a leaf saves sliding the main door for every visit.
No headroom needed. With side-opening leaves, cranes, lights and services overhead stay clear.
Robust build. Steel-framed leaves with steel, panel or timber cladding.

Typical scopes of work

Renewing seized trolleys and a distorted overhead track on large sliding doors to a vehicle shed.
Installing telescopic sliding doors where the wall space to one side is limited by an adjoining structure.
Adding a steel support beam and top-hung track so a sliding door leaves the floor flush for forklifts.

Powered door rules that apply in Ledbury

Ledbury is in England, where powered industrial doors fall under Great Britain's health and safety law. Whoever makes a door powered — including converting a manual door — usually takes on the manufacturer's duties under the Supply of Machinery (Safety) Regulations 2008: risk assessment, technical file, conformity marking and a Declaration of Conformity. Once it is in use, the employer or occupier must keep it safe under the Workplace (Health, Safety and Welfare) Regulations 1992 and PUWER 1998.

Access, phasing and timing

Downtime matters on a working site, so the programme is set around your shifts. For a single door the opening is usually needed for a day; multi-door jobs are done one bay at a time so deliveries keep moving.

Guide prices

Sliding and folding industrial doors guide prices
Item	Guide price (ex VAT)
Sliding / folding industrial doors	£5,995 – £24,995
Strip-out and disposal on replacement	£345 – £1,195 per door

Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.

Questions from businesses in Ledbury

Do you fit sliding doors on farm buildings around Herefordshire?

Yes. We supply and fit steel sliding doors on agricultural buildings across Herefordshire, including timber-clad leaves, bottom-rolling gear for lightweight portal frames and wicket doors so staff and livestock handlers can get in without opening the main leaves.

Will a sliding door fit our building in Ledbury?

It needs wall space to the side for the leaves to slide past, or room for folded leaves to stack. We measure this on survey and choose between sliding, telescopic and folding layouts to suit what is there.

Can our existing sliding doors in Ledbury be motorised?

Often, if the leaves and track are in good condition. We assess the doors, fit a drive and the safety devices needed, and take on the conformity responsibilities that come with converting a manual door to power.

Sliding and folding industrial doors near Ledbury

Working in Ledbury? We also take on jobs in Malvern, Ross-on-Wye, Tewkesbury and across Herefordshire.

Other services in Ledbury

More about Sliding and folding industrial doors · industrial doors in Ledbury. Last updated 19 October 2026.