Industrial door motor replacement in Ledbury

At a glance

Industrial door motor replacement for roller shutters, sectional doors and sliding doors in Ledbury. We diagnose the fault, match a new drive to the door and re-commission it with safety devices tested.

Town: Ledbury
Postcode district: HR8
Area: Herefordshire
Guide price: £845 – £2,395

How we look after doors in Ledbury

Written records. A record of the work and tests for your maintenance file.
Obsolete motors. Equivalent drives with adapters where the original model is no longer made.
Re-commissioning. The door is fully re-commissioned and tested before it goes back into use.
Fault diagnosis. Diagnosis comes first, so you only pay for the parts the door actually needs.
Force testing. Closing forces measured to BS EN 12453 where the door closes under power.

Examples of work we can quote for

Re-commissioning a sectional door once a new motor is fitted, including new limit settings and closing force tests.
Diagnosing a stalling roller shutter to confirm whether the motor, a broken spring or the control panel is at fault.
Replacing a burnt-out direct-drive motor on a loading bay door and fitting an inverter control panel at the same time.

Powered door rules that apply in Ledbury

Ledbury is in England, where powered industrial doors fall under Great Britain's health and safety law. Whoever makes a door powered — including converting a manual door — usually takes on the manufacturer's duties under the Supply of Machinery (Safety) Regulations 2008: risk assessment, technical file, conformity marking and a Declaration of Conformity. Once it is in use, the employer or occupier must keep it safe under the Workplace (Health, Safety and Welfare) Regulations 1992 and PUWER 1998.

Planning the work around your site

Before work starts we send a method statement and risk assessment, confirm who on site will be our contact and agree where materials and access equipment will go. On shared industrial estates that can mean booking yard space with the landlord.

Guide prices

Industrial door motor replacement guide prices
Item	Guide price (ex VAT)
Motor replacement	£845 – £2,395
Repair visit (attendance and first hour)	£145 – £195

Guide prices excluding VAT, which is added at the current rate where it applies. The visit price is agreed before we attend, and any repair is quoted before we carry it out.

Your questions about industrial door motor replacement

Will our door in Ledbury be tested after the motor is changed?

Yes. We set limits, test the brake and manual override, check safety devices and measure closing forces where required, then give you a written record of the work and test results.

How soon can a door motor in Ledbury be replaced?

Many common motors can be sourced quickly, and fitting usually takes a few hours once the drive is on site. Specialist or obsolete motors may need ordering; we tell you the lead time with the quote.

Do you replace motors on any make of door across Herefordshire?

We replace motors on most makes of roller shutter, sectional, sliding and high-speed door across Herefordshire, whoever installed them, subject to a suitable drive being available for the door's weight and mounting.

Industrial door motor replacement near Ledbury

Besides Ledbury, we can survey and quote for sites in Malvern, Ross-on-Wye, Tewkesbury and the rest of Herefordshire.

Other services in Ledbury

More about Industrial door motor replacement · industrial doors in Ledbury. Last updated 19 October 2026.