The short version
Is a busy door at your Denton premises left open all shift because closing it slows everyone down? A high-speed door closes behind each forklift in seconds, keeping heat, dust and pests where they belong.
- Town
- Denton
- Postcode district
- M34
- Area
- Greater Manchester
- Survey
- Free for new installations
Options for high-speed doors in Denton
- Inverter drives. Soft start and stop protect the curtain and drive at high cycle rates.
- Fabric doors. Lightweight roll-up curtains that suit most internal doorways and many protected external ones.
- Spiral doors. Rigid insulated slats on a spiral for fast, secure, wind-resistant external doors.
- Light curtains. Sensors along the side frames watch the whole opening and keep the door open while it is occupied.
- Breakaway bottom bars. Bottom bars that release on impact to limit damage to the door and the vehicle.
What this work can involve
- Replacing a worn fabric curtain, bottom bar and drive belt on a door logging thousands of cycles a week.
- Adding a high-speed fabric door inside an existing sectional door so the outer door can stay open during the shift.
- Setting up radar with cross-traffic suppression so a door on a busy aisle opens only for approaching traffic.
Powered door rules that apply in Denton
Denton is in England, where powered industrial doors fall under Great Britain's health and safety law. Whoever makes a door powered — including converting a manual door — usually takes on the manufacturer's duties under the Supply of Machinery (Safety) Regulations 2008: risk assessment, technical file, conformity marking and a Declaration of Conformity. Once it is in use, the employer or occupier must keep it safe under the Workplace (Health, Safety and Welfare) Regulations 1992 and PUWER 1998.
How the work is organised
Sites in and around Denton vary from tight trade counters to large distribution yards. The survey records access for our vehicle and platform, overhead obstructions and floor condition so the installation day runs without surprises.
Guide prices
| Item | Guide price (ex VAT) |
|---|---|
| High-speed fabric door | £7,495 – £15,995 |
| High-speed spiral (rigid slat) door | £17,995 – £34,995 |
Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.
Questions from businesses in Denton
Do you repair high-speed doors across Greater Manchester?
Yes. We repair fabric and spiral high-speed doors across Greater Manchester, including curtains, bottom bars, drives, inverters and safety devices, subject to parts availability. Repair visits are chargeable and quoted up front.
Can you fit a high-speed door alongside our existing door in Denton?
Often, yes. A high-speed door can sit inside or outside an existing shutter or sectional door, with the conventional door closed at night. We check the space and fixings on survey.
How long does it take to install a high-speed door in Denton?
A typical fabric door is fitted and commissioned in a day once it arrives. Spiral doors, interlocks and floor loops add time. The manufacturer's lead time is confirmed with your quote, and we fit around your operations.
High-speed doors near Denton
Our teams cover Denton (M34) and nearby Hyde, Dukinfield, Droylsden, along with the rest of Greater Manchester.
- High-speed doors in Hyde
- High-speed doors in Dukinfield
- High-speed doors in Droylsden
- High-speed doors in Ashton-under-Lyne
- High-speed doors in Stalybridge
- High-speed doors in Stockport
Other services in Denton
- Dock shelters and seals
- Industrial door replacement
- Industrial door motor replacement
- Cold store and freezer doors
- Fire shutters
- Hangar and large-span doors
- Bollards and door protection
- Dock leveller and loading bay repairs
More about High-speed doors · industrial doors in Denton. Last updated 19 October 2026.