Industrial door installation in Barking

The short version

Whether you need one roller shutter or a run of loading bay doors, we can install industrial doors in Barking and across Greater London, starting with a free survey and a written fixed price.

Town: Barking
Postcode district: IG11
Area: Greater London
Survey: Free for new installations

What to specify

Fixed price. You receive the price in writing once the survey is done, and it is agreed before anyone starts work.
Drives and controls. Direct, centre or chain drive motors with buttons, remotes, loops, radar or interlocks.
All door types. Roller shutters, insulated roller, sectional, high-speed, fire, sliding, hangar and cold store doors.
Safety set-up. Each motorised door gets the safety devices its risk assessment calls for and is force-tested before use.
Loading equipment. Dock levellers, shelters, seals, bollards and guide protection fitted alongside the door.

What this work can involve

Installing a fire shutter in a compartment wall where a conveyor line passes between production and dispatch areas.
Replacing corroded roller shutters on a vehicle workshop with insulated roller doors and new key-switch controls.
Phasing the replacement of several loading bay doors over consecutive weekends so goods-in stays open during the week.

Who is responsible for door safety at a site in Barking?

In England, two sets of duties meet at a powered door. The installer who supplies or motorises it must hand over a door that meets the Supply of Machinery (Safety) Regulations 2008, tested against BS EN 12453 and documented. The business in control of the premises must then maintain it: regulation 5 of the Workplace Regulations 1992 covers maintenance, and regulation 18 requires upward-opening doors to have a device that stops them falling back and powered doors to have features that prevent trapping.

Keeping your site running during the work

Where a door is being replaced, the opening has to be made secure at the end of each day. We plan strip-out, any new framing and the new door so the gap is never left open overnight unless you have agreed temporary measures.

Guide prices for industrial door installation

Industrial door installation guide prices
Item	Guide price (ex VAT)
Industrial roller shutter, single-skin steel, electric (to c. 4 × 4 m)	£2,395 – £5,495
Sectional overhead door, 40 mm insulated, electric (to c. 4 × 4.5 m)	£3,495 – £8,495
High-speed fabric door	£7,495 – £15,995

Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.

Questions from businesses in Barking

Do you service and repair industrial doors across Greater London?

Yes. We repair and maintain the doors we install and most other makes across Greater London. Repair and service visits are chargeable, and a planned maintenance schedule can be set up once the new door is in.

How soon could a new door be installed at our Barking premises?

It depends mainly on the manufacturer's lead time for a made-to-measure door, which we confirm in the quote. Installation is then booked around your operations, and most single doors are fitted and commissioned in a day.

How much does industrial door installation cost in Barking?

Guide prices, ex VAT and supplied and fitted, start at £2,395 to £5,495 for an electric single-skin roller shutter up to about 4 × 4 m, or £3,495 to £8,495 for an insulated sectional door. Your fixed price in Barking is confirmed in writing after a free survey.

Industrial door installation near Barking

Besides Barking, we can survey and quote for sites in Ilford, Thamesmead, Woolwich and the rest of Greater London.

Other services in Barking

More about Industrial door installation · industrial doors in Barking. Last updated 19 October 2026.