Industrial door installation in Portsmouth

Quick answer

Looking for industrial door installers who cover Portsmouth and the rest of Hampshire? We fit every common door type, add the controls and safety devices your risk assessment needs, and can look after servicing afterwards.

Town: Portsmouth
Postcode district: PO1
Area: Hampshire
Survey: Free for new installations

Options for industrial door installation in Portsmouth

All door types. Roller shutters, insulated roller, sectional, high-speed, fire, sliding, hangar and cold store doors.
Loading equipment. The door, leveller, shelter and impact protection are specified together so the whole bay works as one.
Aftercare. Once fitted, we can service the door on a schedule and repair it, along with doors from other installers.
Safety set-up. Powered doors fitted with safety edges or light curtains and force-tested to BS EN 12453.
Drives and controls. Direct, centre or chain drive motors with buttons, remotes, loops, radar or interlocks.

Typical scopes of work

Replacing corroded roller shutters on a vehicle workshop with insulated roller doors and new key-switch controls.
Fitting a freezer door with heated frame and inside release to a new cold room within a food production unit.
Installing a fire shutter in a compartment wall where a conveyor line passes between production and dispatch areas.

Powered door rules that apply in Portsmouth

Portsmouth is in England, where powered industrial doors fall under Great Britain's health and safety law. Whoever makes a door powered — including converting a manual door — usually takes on the manufacturer's duties under the Supply of Machinery (Safety) Regulations 2008: risk assessment, technical file, conformity marking and a Declaration of Conformity. Once it is in use, the employer or occupier must keep it safe under the Workplace (Health, Safety and Welfare) Regulations 1992 and PUWER 1998.

How the work is organised

Where a door is being replaced, the opening has to be made secure at the end of each day. We plan strip-out, any new framing and the new door so the gap is never left open overnight unless you have agreed temporary measures.

Prices for industrial door installation in Portsmouth

Industrial door installation guide prices
Item	Guide price (ex VAT)
Industrial roller shutter, single-skin steel, electric (to c. 4 × 4 m)	£2,395 – £5,495
Sectional overhead door, 40 mm insulated, electric (to c. 4 × 4.5 m)	£3,495 – £8,495
High-speed fabric door	£7,495 – £15,995

Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.

Industrial door installation in Portsmouth: your questions

How much does industrial door installation cost in Portsmouth?

Guide prices, ex VAT and supplied and fitted, start at £2,395 to £5,495 for an electric single-skin roller shutter up to about 4 × 4 m, or £3,495 to £8,495 for an insulated sectional door. Your fixed price in Portsmouth is confirmed in writing after a free survey.

How soon could a new door be installed at our Portsmouth premises?

It depends mainly on the manufacturer's lead time for a made-to-measure door, which we confirm in the quote. Installation is then booked around your operations, and most single doors are fitted and commissioned in a day.

Can you replace an old door at our Portsmouth unit and take the old one away?

Yes. Strip-out and disposal of the old door is priced as a separate line, along with any new framing or making good the opening needs. We confirm these details at survey so nothing is left to agree on the day.

Industrial door installation near Portsmouth

Besides Portsmouth, we can survey and quote for sites in Gosport, Fareham, Ryde and the rest of Hampshire.

Other services in Portsmouth

More about Industrial door installation · industrial doors in Portsmouth. Last updated 19 October 2026.