Industrial door installation in Whitley Bay

At a glance

Facilities and site managers in Whitley Bay can use one contractor to specify, install and commission industrial doors and the loading equipment around them, so one team is responsible for the whole opening.

Town: Whitley Bay
Postcode district: NE26
Area: Tyne and Wear
Survey: Free for new installations

Options that matter on site

Aftercare. Once fitted, we can service the door on a schedule and repair it, along with doors from other installers.
Loading equipment. Dock levellers, shelters, seals, bollards and guide protection fitted alongside the door.
Drives and controls. Direct, centre or chain drive motors with buttons, remotes, loops, radar or interlocks.
Free survey. We measure and inspect the opening first, so the price reflects your building rather than a guess.
Safety set-up. Powered doors fitted with safety edges or light curtains and force-tested to BS EN 12453.

Examples of work we can quote for

Supplying a bottom-rolling sliding door for a wide opening where there is no headroom for a coiled or tracked door.
Adding a high-speed fabric door inside an existing shutter so the main door can stay open through the working day.
Replacing corroded roller shutters on a vehicle workshop with insulated roller doors and new key-switch controls.

Powered door rules that apply in Whitley Bay

Whitley Bay is in England, where powered industrial doors fall under Great Britain's health and safety law. Whoever makes a door powered — including converting a manual door — usually takes on the manufacturer's duties under the Supply of Machinery (Safety) Regulations 2008: risk assessment, technical file, conformity marking and a Declaration of Conformity. Once it is in use, the employer or occupier must keep it safe under the Workplace (Health, Safety and Welfare) Regulations 1992 and PUWER 1998.

Access, phasing and timing

For busy sites in Tyne and Wear the work can be split across visits — preparation and framing first, door installation and commissioning second — so the opening is only out of action for the shortest time.

Guide prices

Industrial door installation guide prices
Item	Guide price (ex VAT)
Industrial roller shutter, single-skin steel, electric (to c. 4 × 4 m)	£2,395 – £5,495
Sectional overhead door, 40 mm insulated, electric (to c. 4 × 4.5 m)	£3,495 – £8,495
High-speed fabric door	£7,495 – £15,995

Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.

Industrial door installation in Whitley Bay: your questions

Can you replace an old door at our Whitley Bay unit and take the old one away?

Yes. Strip-out and disposal of the old door is priced as a separate line, along with any new framing or making good the opening needs. We confirm these details at survey so nothing is left to agree on the day.

Which door types do you install in Whitley Bay?

Roller shutters, insulated roller doors, sectional overhead doors, high-speed doors, fire shutters, sliding and folding doors, hangar doors, cold store doors, steel personnel doors, traffic doors and strip curtains, plus loading bay equipment such as levellers and shelters.

How much does industrial door installation cost in Whitley Bay?

Guide prices, ex VAT and supplied and fitted, start at £2,395 to £5,495 for an electric single-skin roller shutter up to about 4 × 4 m, or £3,495 to £8,495 for an insulated sectional door. Your fixed price in Whitley Bay is confirmed in writing after a free survey.

Industrial door installation near Whitley Bay

Besides Whitley Bay, we can survey and quote for sites in North Shields, South Shields, Jarrow and the rest of Tyne and Wear.

Other services in Whitley Bay

More about Industrial door installation · industrial doors in Whitley Bay. Last updated 19 October 2026.