Industrial roller shutters in Crewe

The short version

Replacing a tired shutter in Crewe, or converting a manual one to electric? We quote a fixed price in writing after surveying the opening, then fit, test and hand over the door.

Town: Crewe
Postcode district: CW1
Area: Cheshire
Survey: Free for new installations

What to specify

Manual override. Powered shutters keep a chain or handle override so they open without power.
Colour finishes. Leave it galvanised or choose a colour that matches the building.
Manual or electric. Hand-operated for occasional use, electric for anything opened through the working day.
Compact coil. Nothing runs back under the roof: the shutter coils up neatly above the lintel.
Safety devices. Motorised shutters get the safety functions their risk assessment needs before handover.

What this work can involve

Face-fixing a roller shutter with a steel hood where internal racking leaves no room behind the opening.
Supplying a security-rated roller shutter, installed to the certified specification, to meet an insurer's requirement for a high-value stockroom.
Renewing the bottom rail, floor seal and end locks on a roller shutter that jams in its guides.

Powered door rules that apply in Crewe

Crewe is in England, where powered industrial doors fall under Great Britain's health and safety law. Whoever makes a door powered — including converting a manual door — usually takes on the manufacturer's duties under the Supply of Machinery (Safety) Regulations 2008: risk assessment, technical file, conformity marking and a Declaration of Conformity. Once it is in use, the employer or occupier must keep it safe under the Workplace (Health, Safety and Welfare) Regulations 1992 and PUWER 1998.

Keeping your site running during the work

Electrical work is the part that most often delays a job. If a new or converted door needs a supply, we confirm the motor's requirement at quote stage so your electrician can provide an isolator in the right place before installation day.

Guide prices for industrial roller shutters

Industrial roller shutters guide prices
Item	Guide price (ex VAT)
Industrial roller shutter, single-skin steel, electric (to c. 4 × 4 m)	£2,395 – £5,495
Manual-to-electric conversion	£1,195 – £3,195
Strip-out and disposal on replacement	£345 – £1,195 per door

Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.

Frequently asked questions

Do you repair roller shutters across Cheshire?

Yes. We repair most makes of roller shutter across Cheshire, including motors, laths, guides, springs and bottom rails. Repair visits are chargeable and priced in advance; we quote before any larger repair.

Can you convert our manual shutter in Crewe to electric?

Often, yes, if the barrel, curtain and guides are in good condition. Our guide price for a conversion is £1,195 to £3,195 ex VAT. We become responsible for the conformity paperwork on the converted door and fit the safety devices it needs.

Do you remove old shutters at sites in Crewe?

Yes. Strip-out and disposal of the old shutter is shown as a separate line in the quote, along with any repairs to the opening. The old door normally comes out as part of the same visit that fits the new one.

Industrial roller shutters near Crewe

Working in Crewe? We also take on jobs in Winsford, Kidsgrove, Congleton and across Cheshire.

Other services in Crewe

More about Industrial roller shutters · industrial doors in Crewe. Last updated 19 October 2026.