Industrial roller shutters in Stoke-on-Trent

In short

Industrial roller shutters for warehouses, yards, workshops and stores in Stoke-on-Trent. We survey the opening, recommend the lath, drive and mounting position, then fit and commission the shutter in a day in most cases.

Town: Stoke-on-Trent
Postcode district: ST4
Area: Staffordshire
Survey: Free for new installations

Options for industrial roller shutters in Stoke-on-Trent

Compact coil. The curtain winds onto a barrel above the opening, leaving floor and roof space free.
Steel curtains. Heavier lath gauges for wide or exposed doors; lighter profiles where space and budget are tight.
Colour finishes. Leave it galvanised or choose a colour that matches the building.
Security. Bottom-rail locks and shoot bolts, with LPS 1175 rated products available.
Manual or electric. Push-up, chain hoist or motorised operation depending on how often the door opens.

Jobs we can carry out

Fitting a galvanised roller shutter to a new bin store or recycling compound, with a lockable bottom rail.
Renewing the bottom rail, floor seal and end locks on a roller shutter that jams in its guides.
Supplying a security-rated roller shutter, installed to the certified specification, to meet an insurer's requirement for a high-value stockroom.

Safety law for industrial doors in England

Industrial doors in Stoke-on-Trent are covered by the same rules as the rest of Great Britain. On handover you should receive user instructions and, for a powered door, the conformity paperwork, because the installer is treated as the manufacturer when they assemble or motorise it. Afterwards, keeping the door in efficient working order is the occupier's job under the Workplace Regulations 1992 and PUWER 1998, which in practice means regular servicing and a written log.

Access, phasing and timing

Sites in and around Stoke-on-Trent vary from tight trade counters to large distribution yards. The survey records access for our vehicle and platform, overhead obstructions and floor condition so the installation day runs without surprises.

Prices for industrial roller shutters in Stoke-on-Trent

Industrial roller shutters guide prices
Item	Guide price (ex VAT)
Industrial roller shutter, single-skin steel, electric (to c. 4 × 4 m)	£2,395 – £5,495
Manual-to-electric conversion	£1,195 – £3,195
Strip-out and disposal on replacement	£345 – £1,195 per door

Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.

Your questions about industrial roller shutters

How much is an industrial roller shutter in Stoke-on-Trent?

An electric single-skin steel roller shutter up to about 4 × 4 m has a guide price of £2,395 to £5,495 ex VAT, supplied and fitted. After a free survey in Stoke-on-Trent, we confirm a fixed price for your opening in writing.

Do you remove old shutters at sites in Stoke-on-Trent?

Yes. Strip-out and disposal of the old shutter is shown as a separate line in the quote, along with any repairs to the opening. The old door normally comes out as part of the same visit that fits the new one.

How quickly can a roller shutter be fitted in Stoke-on-Trent?

Once the made-to-measure shutter arrives, most single doors are fitted and commissioned in a day. The manufacturer's lead time is confirmed with your quote, and installation is booked around your opening hours.

Industrial roller shutters near Stoke-on-Trent

Besides Stoke-on-Trent, we can survey and quote for sites in Newcastle-under-Lyme, Kidsgrove, Congleton and the rest of Staffordshire.

Other services in Stoke-on-Trent

More about Industrial roller shutters · industrial doors in Stoke-on-Trent. Last updated 19 October 2026.