Industrial roller shutters in Stafford

Quick answer

Industrial roller shutters for warehouses, yards, workshops and stores in Stafford. We survey the opening, recommend the lath, drive and mounting position, then fit and commission the shutter in a day in most cases.

Town: Stafford
Postcode district: ST16
Area: Staffordshire
Survey: Free for new installations

Options for industrial roller shutters in Stafford

Safety devices. Safety edges, photocells and anti-fall devices on powered shutters.
Steel curtains. Galvanised steel laths in gauges to suit the width and the level of abuse expected.
Compact coil. Nothing runs back under the roof: the shutter coils up neatly above the lintel.
Manual override. If the power fails, the shutter can still be wound open by hand.
Security. Bottom-rail locks and shoot bolts, with LPS 1175 rated products available.

Jobs we can carry out

Fitting a galvanised roller shutter to a new bin store or recycling compound, with a lockable bottom rail.
Renewing the bottom rail, floor seal and end locks on a roller shutter that jams in its guides.
Replacing a vehicle-damaged shutter in a trade yard with a heavier-gauge curtain and guide-rail protection.

Who is responsible for door safety at a site in Stafford?

In England, two sets of duties meet at a powered door. The installer who supplies or motorises it must hand over a door that meets the Supply of Machinery (Safety) Regulations 2008, tested against BS EN 12453 and documented. The business in control of the premises must then maintain it: regulation 5 of the Workplace Regulations 1992 covers maintenance, and regulation 18 requires upward-opening doors to have a device that stops them falling back and powered doors to have features that prevent trapping.

Access, phasing and timing

Sites in and around Stafford vary from tight trade counters to large distribution yards. The survey records access for our vehicle and platform, overhead obstructions and floor condition so the installation day runs without surprises.

Budgeting for industrial roller shutters in Stafford

Industrial roller shutters guide prices
Item	Guide price (ex VAT)
Industrial roller shutter, single-skin steel, electric (to c. 4 × 4 m)	£2,395 – £5,495
Manual-to-electric conversion	£1,195 – £3,195
Strip-out and disposal on replacement	£345 – £1,195 per door

Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.

Industrial roller shutters in Stafford: your questions

How quickly can a roller shutter be fitted in Stafford?

Once the made-to-measure shutter arrives, most single doors are fitted and commissioned in a day. The manufacturer's lead time is confirmed with your quote, and installation is booked around your opening hours.

Do you remove old shutters at sites in Stafford?

Yes. Strip-out and disposal of the old shutter is shown as a separate line in the quote, along with any repairs to the opening. The old door normally comes out as part of the same visit that fits the new one.

Do you repair roller shutters across Staffordshire?

Yes. We repair most makes of roller shutter across Staffordshire, including motors, laths, guides, springs and bottom rails. Repair visits are chargeable and priced in advance; we quote before any larger repair.

Industrial roller shutters near Stafford

Stafford is in the ST16 postcode district in Staffordshire. We also cover Rugeley, Cannock, Burntwood.

Other services in Stafford

More about Industrial roller shutters · industrial doors in Stafford. Last updated 19 October 2026.