Industrial roller shutters in Cannock

The short version

Industrial roller shutters for warehouses, yards, workshops and stores in Cannock. We survey the opening, recommend the lath, drive and mounting position, then fit and commission the shutter in a day in most cases.

Town: Cannock
Postcode district: WS11
Area: Staffordshire
Survey: Free for new installations

What to specify

Manual override. Powered shutters keep a chain or handle override so they open without power.
Security. Locking options for everyday security, and certified rated shutters where insurers ask for them.
Safety devices. Motorised shutters get the safety functions their risk assessment needs before handover.
Steel curtains. Galvanised steel laths in gauges to suit the width and the level of abuse expected.
Compact coil. The curtain winds onto a barrel above the opening, leaving floor and roof space free.

Typical scopes of work

Converting hand-chained shutters on a storage unit to electric operation with key-switch controls and safety edges.
Supplying a security-rated roller shutter, installed to the certified specification, to meet an insurer's requirement for a high-value stockroom.
Face-fixing a roller shutter with a steel hood where internal racking leaves no room behind the opening.

Powered door rules that apply in Cannock

Cannock is in England, where powered industrial doors fall under Great Britain's health and safety law. Whoever makes a door powered — including converting a manual door — usually takes on the manufacturer's duties under the Supply of Machinery (Safety) Regulations 2008: risk assessment, technical file, conformity marking and a Declaration of Conformity. Once it is in use, the employer or occupier must keep it safe under the Workplace (Health, Safety and Welfare) Regulations 1992 and PUWER 1998.

Keeping your site running during the work

Electrical work is the part that most often delays a job. If a new or converted door needs a supply, we confirm the motor's requirement at quote stage so your electrician can provide an isolator in the right place before installation day.

Budgeting for industrial roller shutters in Cannock

Industrial roller shutters guide prices
Item	Guide price (ex VAT)
Industrial roller shutter, single-skin steel, electric (to c. 4 × 4 m)	£2,395 – £5,495
Manual-to-electric conversion	£1,195 – £3,195
Strip-out and disposal on replacement	£345 – £1,195 per door

Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.

Frequently asked questions

Does an electric roller shutter at our Cannock site need safety devices?

It depends on the risk assessment. A hold-to-run shutter in view of the operator may need little more than force limiting, while one that closes automatically typically needs a safety edge and photocells, tested to BS EN 12453.

How much is an industrial roller shutter in Cannock?

An electric single-skin steel roller shutter up to about 4 × 4 m has a guide price of £2,395 to £5,495 ex VAT, supplied and fitted. After a free survey in Cannock, we confirm a fixed price for your opening in writing.

How quickly can a roller shutter be fitted in Cannock?

Once the made-to-measure shutter arrives, most single doors are fitted and commissioned in a day. The manufacturer's lead time is confirmed with your quote, and installation is booked around your opening hours.

Industrial roller shutters near Cannock

Besides Cannock, we can survey and quote for sites in Burntwood, Bloxwich, Rugeley and the rest of Staffordshire.

Other services in Cannock

More about Industrial roller shutters · industrial doors in Cannock. Last updated 19 October 2026.