Door automation and controls in Cannock

The short version

Busy door at your Cannock (WS11) site? Inverter control, induction loops or radar can open it as traffic arrives and close it straight after, with photocells and safety edges watching the opening.

Town: Cannock
Postcode district: WS11
Area: Staffordshire
Survey: Free for new installations

What to specify

Activation options. Choose how the door is opened, from staff buttons to automatic vehicle detection.
Safety devices. Every automated door gets the detection its risk assessment needs, tested before use.
Interlocks. Doors linked to each other, to levellers or to the alarm so they work in the right sequence.
Manual override. Chain or crank override so doors open during power cuts.
Traffic lights. Red and green lights and warning beacons for drivers.

Jobs we can carry out

Installing an airlock interlock between two high-speed doors so only one can be open at a time.
Adding radar with cross-traffic suppression to a door on a busy aisle so passing trucks do not open it.
Fitting a centre-mounted motor to a roller shutter where a side wall leaves no room at the barrel end.

Safety law for industrial doors in England

Industrial doors in Cannock are covered by the same rules as the rest of Great Britain. On handover you should receive user instructions and, for a powered door, the conformity paperwork, because the installer is treated as the manufacturer when they assemble or motorise it. Afterwards, keeping the door in efficient working order is the occupier's job under the Workplace Regulations 1992 and PUWER 1998, which in practice means regular servicing and a written log.

Planning the work around your site

Electrical work is the part that most often delays a job. If a new or converted door needs a supply, we confirm the motor's requirement at quote stage so your electrician can provide an isolator in the right place before installation day.

Guide prices

Door automation and controls guide prices
Item	Guide price (ex VAT)
Manual-to-electric conversion	£1,195 – £3,195
Safety upgrade (edges, photocells, light curtain)	£445 – £1,795 per door

Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.

Your questions about door automation and controls

Do automated doors in Cannock need more maintenance?

Powered doors need their motors, controls and safety devices checked as well as the mechanical parts, so at least an annual service is common practice, more often for busy doors. Servicing visits are chargeable; the survey for an automation job is free.

Can our door in Cannock be automated?

If the door is in good mechanical order and a suitable motor is available, usually yes. We check balance, springs, cables, guides and the curtain or panels on survey, and recommend repair or replacement first if needed.

How long does a door automation job take in Cannock?

A straightforward conversion is usually completed and commissioned in a day. Loops, interlocks and traffic lights add time, and we plan the work so the door is out of use for as little time as possible.

Door automation and controls near Cannock

Cannock is in the WS11 postcode district in Staffordshire. We also cover Burntwood, Bloxwich, Rugeley.

Other services in Cannock

More about Door automation and controls · industrial doors in Cannock. Last updated 19 October 2026.