Industrial roller shutters in Bishop Auckland

Quick answer

Replacing a tired shutter in Bishop Auckland, or converting a manual one to electric? We quote a fixed price in writing after surveying the opening, then fit, test and hand over the door.

Town: Bishop Auckland
Postcode district: DL14
Area: County Durham
Survey: Free for new installations

What we fit in Bishop Auckland

Manual override. If the power fails, the shutter can still be wound open by hand.
Manual or electric. Push-up, chain hoist or motorised operation depending on how often the door opens.
Colour finishes. Plain galvanised or powder-coated to a RAL colour.
Mounting options. Fixed inside, in the reveal or face-fixed outside with a protective hood.
Steel curtains. Heavier lath gauges for wide or exposed doors; lighter profiles where space and budget are tight.

Typical scopes of work

Installing perforated shutters across a covered loading area so the space stays ventilated and visible when locked.
Renewing the bottom rail, floor seal and end locks on a roller shutter that jams in its guides.
Supplying a security-rated roller shutter, installed to the certified specification, to meet an insurer's requirement for a high-value stockroom.

Powered door rules that apply in Bishop Auckland

Bishop Auckland is in England, where powered industrial doors fall under Great Britain's health and safety law. Whoever makes a door powered — including converting a manual door — usually takes on the manufacturer's duties under the Supply of Machinery (Safety) Regulations 2008: risk assessment, technical file, conformity marking and a Declaration of Conformity. Once it is in use, the employer or occupier must keep it safe under the Workplace (Health, Safety and Welfare) Regulations 1992 and PUWER 1998.

Access, phasing and timing

For busy sites in County Durham the work can be split across visits — preparation and framing first, door installation and commissioning second — so the opening is only out of action for the shortest time.

Guide prices

Industrial roller shutters guide prices
Item	Guide price (ex VAT)
Industrial roller shutter, single-skin steel, electric (to c. 4 × 4 m)	£2,395 – £5,495
Manual-to-electric conversion	£1,195 – £3,195
Strip-out and disposal on replacement	£345 – £1,195 per door

Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.

Questions from businesses in Bishop Auckland

How much is an industrial roller shutter in Bishop Auckland?

An electric single-skin steel roller shutter up to about 4 × 4 m has a guide price of £2,395 to £5,495 ex VAT, supplied and fitted. After a free survey in Bishop Auckland, we confirm a fixed price for your opening in writing.

Do you repair roller shutters across County Durham?

Yes. We repair most makes of roller shutter across County Durham, including motors, laths, guides, springs and bottom rails. Repair visits are chargeable and priced in advance; we quote before any larger repair.

Can you convert our manual shutter in Bishop Auckland to electric?

Often, yes, if the barrel, curtain and guides are in good condition. Our guide price for a conversion is £1,195 to £3,195 ex VAT. We become responsible for the conformity paperwork on the converted door and fit the safety devices it needs.

Industrial roller shutters near Bishop Auckland

Working in Bishop Auckland? We also take on jobs in Newton Aycliffe, Durham, Darlington and across County Durham.

Other services in Bishop Auckland

More about Industrial roller shutters · industrial doors in Bishop Auckland. Last updated 19 October 2026.