Industrial roller shutters in Dunfermline

The short version

Industrial roller shutters for warehouses, yards, workshops and stores in Dunfermline. We survey the opening, recommend the lath, drive and mounting position, then fit and commission the shutter in a day in most cases.

Town: Dunfermline
Postcode district: KY12
Area: Fife
Survey: Free for new installations

Options for industrial roller shutters in Dunfermline

Steel curtains. Heavier lath gauges for wide or exposed doors; lighter profiles where space and budget are tight.
Manual override. If the power fails, the shutter can still be wound open by hand.
Compact coil. Nothing runs back under the roof: the shutter coils up neatly above the lintel.
Security. Locking options for everyday security, and certified rated shutters where insurers ask for them.
Colour finishes. Plain galvanised or powder-coated to a RAL colour.

Jobs we can carry out

Face-fixing a roller shutter with a steel hood where internal racking leaves no room behind the opening.
Supplying a security-rated roller shutter, installed to the certified specification, to meet an insurer's requirement for a high-value stockroom.
Fitting a galvanised roller shutter to a new bin store or recycling compound, with a lockable bottom rail.

Powered door rules that apply in Dunfermline

Dunfermline is in Scotland, where powered industrial doors fall under Great Britain's health and safety law. Whoever makes a door powered — including converting a manual door — usually takes on the manufacturer's duties under the Supply of Machinery (Safety) Regulations 2008: risk assessment, technical file, conformity marking and a Declaration of Conformity. Once it is in use, the employer or occupier must keep it safe under the Workplace (Health, Safety and Welfare) Regulations 1992 and PUWER 1998.

Keeping your site running during the work

Sites in and around Dunfermline vary from tight trade counters to large distribution yards. The survey records access for our vehicle and platform, overhead obstructions and floor condition so the installation day runs without surprises.

Budgeting for industrial roller shutters in Dunfermline

Industrial roller shutters guide prices
Item	Guide price (ex VAT)
Industrial roller shutter, single-skin steel, electric (to c. 4 × 4 m)	£2,395 – £5,495
Manual-to-electric conversion	£1,195 – £3,195
Strip-out and disposal on replacement	£345 – £1,195 per door

Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.

Your questions about industrial roller shutters

Do you repair roller shutters across Fife?

Yes. We repair most makes of roller shutter across Fife, including motors, laths, guides, springs and bottom rails. Repair visits are chargeable and priced in advance; we quote before any larger repair.

Does an electric roller shutter at our Dunfermline site need safety devices?

It depends on the risk assessment. A hold-to-run shutter in view of the operator may need little more than force limiting, while one that closes automatically typically needs a safety edge and photocells, tested to BS EN 12453.

Can you supply security-rated shutters in Dunfermline?

Yes. Where your insurer asks for a rating such as LPS 1175, we supply a shutter whose manufacturer holds that certification and install it to the certified specification. Check the exact rating your insurer wants before ordering.

Industrial roller shutters near Dunfermline

Dunfermline is in the KY12 postcode district in Fife. We also cover Rosyth, Bo'ness, Kinross.

Other services in Dunfermline

More about Industrial roller shutters · industrial doors in Dunfermline. Last updated 19 October 2026.