Industrial roller shutters in Bo'ness

The short version

From bin stores to goods-in openings, we can install industrial roller shutters at premises in Bo'ness, set up powered shutters to BS EN 12453 and leave you with the paperwork for your files.

Town: Bo'ness
Postcode district: EH51
Area: Forth Valley
Survey: Free for new installations

What we fit in Bo'ness

Manual override. If the power fails, the shutter can still be wound open by hand.
Colour finishes. Leave it galvanised or choose a colour that matches the building.
Safety devices. Safety edges, photocells and anti-fall devices on powered shutters.
Manual or electric. Hand-operated for occasional use, electric for anything opened through the working day.
Mounting options. Fixed inside, in the reveal or face-fixed outside with a protective hood.

What this work can involve

Renewing the bottom rail, floor seal and end locks on a roller shutter that jams in its guides.
Supplying a security-rated roller shutter, installed to the certified specification, to meet an insurer's requirement for a high-value stockroom.
Fitting a galvanised roller shutter to a new bin store or recycling compound, with a lockable bottom rail.

Who is responsible for door safety at a site in Bo'ness?

In Scotland, two sets of duties meet at a powered door. The installer who supplies or motorises it must hand over a door that meets the Supply of Machinery (Safety) Regulations 2008, tested against BS EN 12453 and documented. The business in control of the premises must then maintain it: regulation 5 of the Workplace Regulations 1992 covers maintenance, and regulation 18 requires upward-opening doors to have a device that stops them falling back and powered doors to have features that prevent trapping.

Planning the work around your site

Most installations in Bo'ness can be phased so part of the site keeps working. We agree access routes, exclusion zones and any temporary security with you before the team arrives, and can work early mornings, evenings or weekends where the business needs it.

Guide prices for industrial roller shutters

Industrial roller shutters guide prices
Item	Guide price (ex VAT)
Industrial roller shutter, single-skin steel, electric (to c. 4 × 4 m)	£2,395 – £5,495
Manual-to-electric conversion	£1,195 – £3,195
Strip-out and disposal on replacement	£345 – £1,195 per door

Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.

Your questions about industrial roller shutters

Does an electric roller shutter at our Bo'ness site need safety devices?

It depends on the risk assessment. A hold-to-run shutter in view of the operator may need little more than force limiting, while one that closes automatically typically needs a safety edge and photocells, tested to BS EN 12453.

Can you convert our manual shutter in Bo'ness to electric?

Often, yes, if the barrel, curtain and guides are in good condition. Our guide price for a conversion is £1,195 to £3,195 ex VAT. We become responsible for the conformity paperwork on the converted door and fit the safety devices it needs.

How much is an industrial roller shutter in Bo'ness?

An electric single-skin steel roller shutter up to about 4 × 4 m has a guide price of £2,395 to £5,495 ex VAT, supplied and fitted. After a free survey in Bo'ness, we confirm a fixed price for your opening in writing.

Industrial roller shutters near Bo'ness

Working in Bo'ness? We also take on jobs in Grangemouth, Rosyth, Falkirk and across Forth Valley.

Other services in Bo'ness

More about Industrial roller shutters · industrial doors in Bo'ness. Last updated 19 October 2026.