Industrial roller shutters in Barking

Quick answer

From bin stores to goods-in openings, we can install industrial roller shutters at premises in Barking, set up powered shutters to BS EN 12453 and leave you with the paperwork for your files.

Town: Barking
Postcode district: IG11
Area: Greater London
Survey: Free for new installations

What to specify

Mounting options. We mount the shutter wherever it fits most easily, including outside with a hood over the coil.
Safety devices. Motorised shutters get the safety functions their risk assessment needs before handover.
Steel curtains. Heavier lath gauges for wide or exposed doors; lighter profiles where space and budget are tight.
Security. Bottom-rail locks and shoot bolts, with LPS 1175 rated products available.
Manual or electric. Hand-operated for occasional use, electric for anything opened through the working day.

What this work can involve

Converting hand-chained shutters on a storage unit to electric operation with key-switch controls and safety edges.
Fitting a galvanised roller shutter to a new bin store or recycling compound, with a lockable bottom rail.
Renewing the bottom rail, floor seal and end locks on a roller shutter that jams in its guides.

Who is responsible for door safety at a site in Barking?

In England, two sets of duties meet at a powered door. The installer who supplies or motorises it must hand over a door that meets the Supply of Machinery (Safety) Regulations 2008, tested against BS EN 12453 and documented. The business in control of the premises must then maintain it: regulation 5 of the Workplace Regulations 1992 covers maintenance, and regulation 18 requires upward-opening doors to have a device that stops them falling back and powered doors to have features that prevent trapping.

Access, phasing and timing

Sites in and around Barking vary from tight trade counters to large distribution yards. The survey records access for our vehicle and platform, overhead obstructions and floor condition so the installation day runs without surprises.

Prices for industrial roller shutters in Barking

Industrial roller shutters guide prices
Item	Guide price (ex VAT)
Industrial roller shutter, single-skin steel, electric (to c. 4 × 4 m)	£2,395 – £5,495
Manual-to-electric conversion	£1,195 – £3,195
Strip-out and disposal on replacement	£345 – £1,195 per door

Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.

Frequently asked questions

Can you convert our manual shutter in Barking to electric?

Often, yes, if the barrel, curtain and guides are in good condition. Our guide price for a conversion is £1,195 to £3,195 ex VAT. We become responsible for the conformity paperwork on the converted door and fit the safety devices it needs.

Do you remove old shutters at sites in Barking?

Yes. Strip-out and disposal of the old shutter is shown as a separate line in the quote, along with any repairs to the opening. The old door normally comes out as part of the same visit that fits the new one.

How much is an industrial roller shutter in Barking?

An electric single-skin steel roller shutter up to about 4 × 4 m has a guide price of £2,395 to £5,495 ex VAT, supplied and fitted. After a free survey in Barking, we confirm a fixed price for your opening in writing.

Industrial roller shutters near Barking

Besides Barking, we can survey and quote for sites in Ilford, Thamesmead, Woolwich and the rest of Greater London.

Other services in Barking

More about Industrial roller shutters · industrial doors in Barking. Last updated 19 October 2026.