Industrial roller shutters in Greater London

The short version

We can fit new steel roller shutters and replace old, damaged ones in Greater London and across England, with strip-out, disposal and any new framing priced up front after a free site survey.

Area: Greater London
Nation: England
Main town: London
Survey: Free for new installations

What to specify

Manual or electric. Hand-operated for occasional use, electric for anything opened through the working day.
Security. Bottom-rail locks and shoot bolts, with LPS 1175 rated products available.
Steel curtains. Galvanised steel laths in gauges to suit the width and the level of abuse expected.
Compact coil. The curtain winds onto a barrel above the opening, leaving floor and roof space free.
Safety devices. Safety edges, photocells and anti-fall devices on powered shutters.

Jobs we can carry out

Supplying a security-rated roller shutter, installed to the certified specification, to meet an insurer's requirement for a high-value stockroom.
Fitting a galvanised roller shutter to a new bin store or recycling compound, with a lockable bottom rail.
Converting hand-chained shutters on a storage unit to electric operation with key-switch controls and safety edges.

Safety law for industrial doors in England

Industrial doors in Greater London are covered by the same rules as the rest of Great Britain. On handover you should receive user instructions and, for a powered door, the conformity paperwork, because the installer is treated as the manufacturer when they assemble or motorise it. Afterwards, keeping the door in efficient working order is the occupier's job under the Workplace Regulations 1992 and PUWER 1998, which in practice means regular servicing and a written log.

How the work is organised

Downtime matters on a working site, so the programme is set around your shifts. For a single door the opening is usually needed for a day; multi-door jobs are done one bay at a time so deliveries keep moving.

Guide prices

Industrial roller shutters guide prices
Item	Guide price (ex VAT)
Industrial roller shutter, single-skin steel, electric (to c. 4 × 4 m)	£2,395 – £5,495
Manual-to-electric conversion	£1,195 – £3,195
Strip-out and disposal on replacement	£345 – £1,195 per door

Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.

Your questions about industrial roller shutters

Does an electric roller shutter at our Greater London site need safety devices?

It depends on the risk assessment. A hold-to-run shutter in view of the operator may need little more than force limiting, while one that closes automatically typically needs a safety edge and photocells, tested to BS EN 12453.

Do you remove old shutters at sites in Greater London?

Yes. Strip-out and disposal of the old shutter is shown as a separate line in the quote, along with any repairs to the opening. The old door normally comes out as part of the same visit that fits the new one.

How quickly can a roller shutter be fitted in Greater London?

Once the made-to-measure shutter arrives, most single doors are fitted and commissioned in a day. The manufacturer's lead time is confirmed with your quote, and installation is booked around your opening hours.

Towns in Greater London we cover

We cover 90 towns in Greater London for industrial roller shutters, including London, Islington, Westminster, Bexley.

Other services in Greater London

More about Industrial roller shutters. Last updated 19 October 2026.