Industrial roller shutters in Wallington

Quick answer

Industrial roller shutters for warehouses, yards, workshops and stores in Wallington. We survey the opening, recommend the lath, drive and mounting position, then fit and commission the shutter in a day in most cases.

Town: Wallington
Postcode district: SM6
Area: Greater London
Survey: Free for new installations

What we fit in Wallington

Manual or electric. Push-up, chain hoist or motorised operation depending on how often the door opens.
Colour finishes. Leave it galvanised or choose a colour that matches the building.
Security. Bottom-rail locks and shoot bolts, with LPS 1175 rated products available.
Safety devices. Safety edges, photocells and anti-fall devices on powered shutters.
Steel curtains. Galvanised steel laths in gauges to suit the width and the level of abuse expected.

Examples of work we can quote for

Fitting a galvanised roller shutter to a new bin store or recycling compound, with a lockable bottom rail.
Renewing the bottom rail, floor seal and end locks on a roller shutter that jams in its guides.
Face-fixing a roller shutter with a steel hood where internal racking leaves no room behind the opening.

Safety law for industrial doors in England

Industrial doors in Wallington are covered by the same rules as the rest of Great Britain. On handover you should receive user instructions and, for a powered door, the conformity paperwork, because the installer is treated as the manufacturer when they assemble or motorise it. Afterwards, keeping the door in efficient working order is the occupier's job under the Workplace Regulations 1992 and PUWER 1998, which in practice means regular servicing and a written log.

Access, phasing and timing

For busy sites in Greater London the work can be split across visits — preparation and framing first, door installation and commissioning second — so the opening is only out of action for the shortest time.

Budgeting for industrial roller shutters in Wallington

Industrial roller shutters guide prices
Item	Guide price (ex VAT)
Industrial roller shutter, single-skin steel, electric (to c. 4 × 4 m)	£2,395 – £5,495
Manual-to-electric conversion	£1,195 – £3,195
Strip-out and disposal on replacement	£345 – £1,195 per door

Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.

Frequently asked questions

Do you remove old shutters at sites in Wallington?

Yes. Strip-out and disposal of the old shutter is shown as a separate line in the quote, along with any repairs to the opening. The old door normally comes out as part of the same visit that fits the new one.

Does an electric roller shutter at our Wallington site need safety devices?

It depends on the risk assessment. A hold-to-run shutter in view of the operator may need little more than force limiting, while one that closes automatically typically needs a safety edge and photocells, tested to BS EN 12453.

How much is an industrial roller shutter in Wallington?

An electric single-skin steel roller shutter up to about 4 × 4 m has a guide price of £2,395 to £5,495 ex VAT, supplied and fitted. After a free survey in Wallington, we confirm a fixed price for your opening in writing.

Industrial roller shutters near Wallington

Besides Wallington, we can survey and quote for sites in Carshalton, Sutton, South Croydon and the rest of Greater London.

Other services in Wallington

More about Industrial roller shutters · industrial doors in Wallington. Last updated 19 October 2026.