Industrial roller shutters in South Croydon

At a glance

We can fit new steel roller shutters and replace old, damaged ones in South Croydon and across Greater London, with strip-out, disposal and any new framing priced up front after a free site survey.

Town: South Croydon
Postcode district: CR2
Area: Greater London
Survey: Free for new installations

Options that matter on site

Compact coil. The curtain winds onto a barrel above the opening, leaving floor and roof space free.
Safety devices. Motorised shutters get the safety functions their risk assessment needs before handover.
Mounting options. We mount the shutter wherever it fits most easily, including outside with a hood over the coil.
Manual override. If the power fails, the shutter can still be wound open by hand.
Manual or electric. Push-up, chain hoist or motorised operation depending on how often the door opens.

Typical scopes of work

Replacing a run of rusted shutters on a block of trade units, finished in one matching RAL colour.
Installing perforated shutters across a covered loading area so the space stays ventilated and visible when locked.
Converting hand-chained shutters on a storage unit to electric operation with key-switch controls and safety edges.

Safety law for industrial doors in England

Industrial doors in South Croydon are covered by the same rules as the rest of Great Britain. On handover you should receive user instructions and, for a powered door, the conformity paperwork, because the installer is treated as the manufacturer when they assemble or motorise it. Afterwards, keeping the door in efficient working order is the occupier's job under the Workplace Regulations 1992 and PUWER 1998, which in practice means regular servicing and a written log.

Access, phasing and timing

Where a door is being replaced, the opening has to be made secure at the end of each day. We plan strip-out, any new framing and the new door so the gap is never left open overnight unless you have agreed temporary measures.

Prices for industrial roller shutters in South Croydon

Industrial roller shutters guide prices
Item	Guide price (ex VAT)
Industrial roller shutter, single-skin steel, electric (to c. 4 × 4 m)	£2,395 – £5,495
Manual-to-electric conversion	£1,195 – £3,195
Strip-out and disposal on replacement	£345 – £1,195 per door

Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.

Frequently asked questions

Does an electric roller shutter at our South Croydon site need safety devices?

It depends on the risk assessment. A hold-to-run shutter in view of the operator may need little more than force limiting, while one that closes automatically typically needs a safety edge and photocells, tested to BS EN 12453.

Do you remove old shutters at sites in South Croydon?

Yes. Strip-out and disposal of the old shutter is shown as a separate line in the quote, along with any repairs to the opening. The old door normally comes out as part of the same visit that fits the new one.

How much is an industrial roller shutter in South Croydon?

An electric single-skin steel roller shutter up to about 4 × 4 m has a guide price of £2,395 to £5,495 ex VAT, supplied and fitted. After a free survey in South Croydon, we confirm a fixed price for your opening in writing.

Industrial roller shutters near South Croydon

Besides South Croydon, we can survey and quote for sites in Croydon, Purley, Wallington and the rest of Greater London.

Other services in South Croydon

More about Industrial roller shutters · industrial doors in South Croydon. Last updated 19 October 2026.