Industrial roller shutters in Hampton

Quick answer

Need a tough, space-saving door for a unit in Hampton? Single-skin steel roller shutters coil neatly above the opening and can be manual or electric, with security upgrades where your insurer requires them.

Town: Hampton
Postcode district: TW12
Area: Greater London
Survey: Free for new installations

What we fit in Hampton

Compact coil. The curtain winds onto a barrel above the opening, leaving floor and roof space free.
Security. Bottom-rail locks and shoot bolts, with LPS 1175 rated products available.
Mounting options. Fixed inside, in the reveal or face-fixed outside with a protective hood.
Manual override. If the power fails, the shutter can still be wound open by hand.
Safety devices. Safety edges, photocells and anti-fall devices on powered shutters.

Examples of work we can quote for

Replacing a vehicle-damaged shutter in a trade yard with a heavier-gauge curtain and guide-rail protection.
Renewing the bottom rail, floor seal and end locks on a roller shutter that jams in its guides.
Supplying a security-rated roller shutter, installed to the certified specification, to meet an insurer's requirement for a high-value stockroom.

Powered door rules that apply in Hampton

Hampton is in England, where powered industrial doors fall under Great Britain's health and safety law. Whoever makes a door powered — including converting a manual door — usually takes on the manufacturer's duties under the Supply of Machinery (Safety) Regulations 2008: risk assessment, technical file, conformity marking and a Declaration of Conformity. Once it is in use, the employer or occupier must keep it safe under the Workplace (Health, Safety and Welfare) Regulations 1992 and PUWER 1998.

Planning the work around your site

Most installations in Hampton can be phased so part of the site keeps working. We agree access routes, exclusion zones and any temporary security with you before the team arrives, and can work early mornings, evenings or weekends where the business needs it.

Budgeting for industrial roller shutters in Hampton

Industrial roller shutters guide prices
Item	Guide price (ex VAT)
Industrial roller shutter, single-skin steel, electric (to c. 4 × 4 m)	£2,395 – £5,495
Manual-to-electric conversion	£1,195 – £3,195
Strip-out and disposal on replacement	£345 – £1,195 per door

Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.

Frequently asked questions

Do you repair roller shutters across Greater London?

Yes. We repair most makes of roller shutter across Greater London, including motors, laths, guides, springs and bottom rails. Repair visits are chargeable and priced in advance; we quote before any larger repair.

Does an electric roller shutter at our Hampton site need safety devices?

It depends on the risk assessment. A hold-to-run shutter in view of the operator may need little more than force limiting, while one that closes automatically typically needs a safety edge and photocells, tested to BS EN 12453.

Can you convert our manual shutter in Hampton to electric?

Often, yes, if the barrel, curtain and guides are in good condition. Our guide price for a conversion is £1,195 to £3,195 ex VAT. We become responsible for the conformity paperwork on the converted door and fit the safety devices it needs.

Industrial roller shutters near Hampton

Besides Hampton, we can survey and quote for sites in Hanworth, Sunbury-on-Thames, Walton-on-Thames and the rest of Greater London.

Other services in Hampton

More about Industrial roller shutters · industrial doors in Hampton. Last updated 19 October 2026.