Industrial roller shutters in Chelsea

In short

Replacing a tired shutter in Chelsea, or converting a manual one to electric? We quote a fixed price in writing after surveying the opening, then fit, test and hand over the door.

Town: Chelsea
Postcode district: SW3
Area: Greater London
Survey: Free for new installations

What to specify

Mounting options. We mount the shutter wherever it fits most easily, including outside with a hood over the coil.
Manual override. If the power fails, the shutter can still be wound open by hand.
Safety devices. Safety edges, photocells and anti-fall devices on powered shutters.
Colour finishes. Plain galvanised or powder-coated to a RAL colour.
Manual or electric. Hand-operated for occasional use, electric for anything opened through the working day.

Examples of work we can quote for

Renewing the bottom rail, floor seal and end locks on a roller shutter that jams in its guides.
Face-fixing a roller shutter with a steel hood where internal racking leaves no room behind the opening.
Replacing a run of rusted shutters on a block of trade units, finished in one matching RAL colour.

Safety law for industrial doors in England

Industrial doors in Chelsea are covered by the same rules as the rest of Great Britain. On handover you should receive user instructions and, for a powered door, the conformity paperwork, because the installer is treated as the manufacturer when they assemble or motorise it. Afterwards, keeping the door in efficient working order is the occupier's job under the Workplace Regulations 1992 and PUWER 1998, which in practice means regular servicing and a written log.

Planning the work around your site

Sites in and around Chelsea vary from tight trade counters to large distribution yards. The survey records access for our vehicle and platform, overhead obstructions and floor condition so the installation day runs without surprises.

Budgeting for industrial roller shutters in Chelsea

Industrial roller shutters guide prices
Item	Guide price (ex VAT)
Industrial roller shutter, single-skin steel, electric (to c. 4 × 4 m)	£2,395 – £5,495
Manual-to-electric conversion	£1,195 – £3,195
Strip-out and disposal on replacement	£345 – £1,195 per door

Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.

Your questions about industrial roller shutters

Can you convert our manual shutter in Chelsea to electric?

Often, yes, if the barrel, curtain and guides are in good condition. Our guide price for a conversion is £1,195 to £3,195 ex VAT. We become responsible for the conformity paperwork on the converted door and fit the safety devices it needs.

Does an electric roller shutter at our Chelsea site need safety devices?

It depends on the risk assessment. A hold-to-run shutter in view of the operator may need little more than force limiting, while one that closes automatically typically needs a safety edge and photocells, tested to BS EN 12453.

How quickly can a roller shutter be fitted in Chelsea?

Once the made-to-measure shutter arrives, most single doors are fitted and commissioned in a day. The manufacturer's lead time is confirmed with your quote, and installation is booked around your opening hours.

Industrial roller shutters near Chelsea

Besides Chelsea, we can survey and quote for sites in Battersea, Fulham, Pimlico and the rest of Greater London.

Other services in Chelsea

More about Industrial roller shutters · industrial doors in Chelsea. Last updated 19 October 2026.