Sectional overhead doors in Chelsea

The short version

Sectional overhead doors for warehouses, workshops and loading bays in Chelsea. We survey the opening, specify the panels, tracks and drive to suit how the door is used, then install and commission it with full handover paperwork.

Town: Chelsea
Postcode district: SW3
Area: Greater London
Survey: Free for new installations

What to specify

Insulated panels. Steel sandwich panels with a foam core keep heat in and noise out; thicker panels are available for temperature-controlled units.
Vision panels. Add a row of vision panels or full-vision aluminium sections for daylight and a clear view of vehicles outside.
Safety devices. Spring-break and cable-break protection, safety edges, photocells or light curtains, set up to BS EN 12453.
Wicket doors. Integrated pass doors, including low-threshold versions, for staff access without opening the main door.
Electric drives. Shaft-mounted motors with push-button, remote, loop or radar control, and inverter drives for high-cycle bays.

Jobs we can carry out

Renewing torsion springs and lift cables on a busy loading bay door, with higher-cycle springs where the usage justifies them.
Adding induction loops and an inverter drive so forklifts can open a busy internal sectional door without stopping.
Supplying full-vision aluminium sections for a vehicle workshop door so technicians get daylight without opening the door.

Powered door rules that apply in Chelsea

Chelsea is in England, where powered industrial doors fall under Great Britain's health and safety law. Whoever makes a door powered — including converting a manual door — usually takes on the manufacturer's duties under the Supply of Machinery (Safety) Regulations 2008: risk assessment, technical file, conformity marking and a Declaration of Conformity. Once it is in use, the employer or occupier must keep it safe under the Workplace (Health, Safety and Welfare) Regulations 1992 and PUWER 1998.

Planning the work around your site

Electrical work is the part that most often delays a job. If a new or converted door needs a supply, we confirm the motor's requirement at quote stage so your electrician can provide an isolator in the right place before installation day.

Prices for sectional overhead doors in Chelsea

Sectional overhead doors guide prices
Item	Guide price (ex VAT)
Sectional overhead door, 40 mm insulated, electric (to c. 4 × 4.5 m)	£3,495 – £8,495
Strip-out and disposal on replacement	£345 – £1,195 per door

Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.

Your questions about sectional overhead doors

Will a sectional door reduce heating costs at our Chelsea premises?

An insulated, well-sealed sectional door loses much less heat than a single-skin shutter, and keeping it closed with fast electric operation helps further. Actual savings depend on your building, heating and how often the door is open.

Do you survey sites in Chelsea before quoting?

Yes. Surveys for new and replacement doors are free. We measure the opening, headroom and obstructions, check the fixings and power supply, and discuss how the door will be used before we price it.

Can you replace a roller shutter with a sectional door at our Chelsea unit?

Usually, yes, provided there is enough headroom and side room for the tracks. Low-headroom track kits cover many older units. We check this on the survey and include strip-out and making good in the quote.

Sectional overhead doors near Chelsea

Our teams cover Chelsea (SW3) and nearby Battersea, Fulham, Pimlico, along with the rest of Greater London.

Other services in Chelsea

More about Sectional overhead doors · industrial doors in Chelsea. Last updated 19 October 2026.