Sectional overhead doors in Pimlico

In short

We can install sectional overhead doors in Pimlico and across Greater London, on new industrial units and as replacements for tired roller shutters. Every job starts with a free survey and ends with a commissioned, tested door.

Town: Pimlico
Postcode district: SW1V
Area: Greater London
Survey: Free for new installations

What to specify

Safety devices. Spring-break and cable-break protection, safety edges, photocells or light curtains, set up to BS EN 12453.
Track layouts. We pick the track after measuring headroom and obstructions, so the door clears lights, sprinklers and crane rails.
Wicket doors. A pass door built into the panels saves opening the whole door for pedestrians; low-threshold options reduce trips.
Finishes. RAL colours to match cladding, with stucco or woodgrain embossing on the outer skin.
Vision panels. Add a row of vision panels or full-vision aluminium sections for daylight and a clear view of vehicles outside.

Typical scopes of work

Renewing torsion springs and lift cables on a busy loading bay door, with higher-cycle springs where the usage justifies them.
Replacing a draughty single-skin roller shutter with an insulated sectional door and a low-threshold wicket door.
Adding induction loops and an inverter drive so forklifts can open a busy internal sectional door without stopping.

Safety law for industrial doors in England

Industrial doors in Pimlico are covered by the same rules as the rest of Great Britain. On handover you should receive user instructions and, for a powered door, the conformity paperwork, because the installer is treated as the manufacturer when they assemble or motorise it. Afterwards, keeping the door in efficient working order is the occupier's job under the Workplace Regulations 1992 and PUWER 1998, which in practice means regular servicing and a written log.

Keeping your site running during the work

For busy sites in Greater London the work can be split across visits — preparation and framing first, door installation and commissioning second — so the opening is only out of action for the shortest time.

Budgeting for sectional overhead doors in Pimlico

Sectional overhead doors guide prices
Item	Guide price (ex VAT)
Sectional overhead door, 40 mm insulated, electric (to c. 4 × 4.5 m)	£3,495 – £8,495
Strip-out and disposal on replacement	£345 – £1,195 per door

Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.

Questions from businesses in Pimlico

Can you replace a roller shutter with a sectional door at our Pimlico unit?

Usually, yes, provided there is enough headroom and side room for the tracks. Low-headroom track kits cover many older units. We check this on the survey and include strip-out and making good in the quote.

How much is a sectional overhead door in Pimlico?

Our guide price for an electric, 40 mm insulated sectional door up to about 4 × 4.5 m is £3,495 to £8,495 ex VAT, supplied and fitted. The fixed price for your opening in Pimlico is confirmed in writing after a free survey.

Will a sectional door reduce heating costs at our Pimlico premises?

An insulated, well-sealed sectional door loses much less heat than a single-skin shutter, and keeping it closed with fast electric operation helps further. Actual savings depend on your building, heating and how often the door is open.

Sectional overhead doors near Pimlico

Working in Pimlico? We also take on jobs in Westminster, Battersea, Chelsea and across Greater London.

Other services in Pimlico

More about Sectional overhead doors · industrial doors in Pimlico. Last updated 19 October 2026.