Industrial roller shutters in Pimlico

In short

Roller shutters are a practical choice for sites in Pimlico (SW1V): quick to fit, hard-wearing and compact. We supply them in galvanised or colour-coated steel with the controls you need.

Town: Pimlico
Postcode district: SW1V
Area: Greater London
Survey: Free for new installations

What we fit in Pimlico

Safety devices. Safety edges, photocells and anti-fall devices on powered shutters.
Compact coil. Nothing runs back under the roof: the shutter coils up neatly above the lintel.
Security. Bottom-rail locks and shoot bolts, with LPS 1175 rated products available.
Manual or electric. Push-up, chain hoist or motorised operation depending on how often the door opens.
Steel curtains. Galvanised steel laths in gauges to suit the width and the level of abuse expected.

Typical scopes of work

Supplying a security-rated roller shutter, installed to the certified specification, to meet an insurer's requirement for a high-value stockroom.
Replacing a vehicle-damaged shutter in a trade yard with a heavier-gauge curtain and guide-rail protection.
Face-fixing a roller shutter with a steel hood where internal racking leaves no room behind the opening.

Safety law for industrial doors in England

Industrial doors in Pimlico are covered by the same rules as the rest of Great Britain. On handover you should receive user instructions and, for a powered door, the conformity paperwork, because the installer is treated as the manufacturer when they assemble or motorise it. Afterwards, keeping the door in efficient working order is the occupier's job under the Workplace Regulations 1992 and PUWER 1998, which in practice means regular servicing and a written log.

Access, phasing and timing

Before work starts we send a method statement and risk assessment, confirm who on site will be our contact and agree where materials and access equipment will go. On shared industrial estates that can mean booking yard space with the landlord.

Guide prices

Industrial roller shutters guide prices
Item	Guide price (ex VAT)
Industrial roller shutter, single-skin steel, electric (to c. 4 × 4 m)	£2,395 – £5,495
Manual-to-electric conversion	£1,195 – £3,195
Strip-out and disposal on replacement	£345 – £1,195 per door

Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.

Your questions about industrial roller shutters

Can you convert our manual shutter in Pimlico to electric?

Often, yes, if the barrel, curtain and guides are in good condition. Our guide price for a conversion is £1,195 to £3,195 ex VAT. We become responsible for the conformity paperwork on the converted door and fit the safety devices it needs.

Does an electric roller shutter at our Pimlico site need safety devices?

It depends on the risk assessment. A hold-to-run shutter in view of the operator may need little more than force limiting, while one that closes automatically typically needs a safety edge and photocells, tested to BS EN 12453.

How much is an industrial roller shutter in Pimlico?

An electric single-skin steel roller shutter up to about 4 × 4 m has a guide price of £2,395 to £5,495 ex VAT, supplied and fitted. After a free survey in Pimlico, we confirm a fixed price for your opening in writing.

Industrial roller shutters near Pimlico

Pimlico is in the SW1V postcode district in Greater London. We also cover Westminster, Battersea, Chelsea.

Other services in Pimlico

More about Industrial roller shutters · industrial doors in Pimlico. Last updated 19 October 2026.