Industrial roller shutters in Eltham

At a glance

We can fit new steel roller shutters and replace old, damaged ones in Eltham and across Greater London, with strip-out, disposal and any new framing priced up front after a free site survey.

Town: Eltham
Postcode district: SE9
Area: Greater London
Survey: Free for new installations

Options for industrial roller shutters in Eltham

Mounting options. Fixed inside, in the reveal or face-fixed outside with a protective hood.
Compact coil. The curtain winds onto a barrel above the opening, leaving floor and roof space free.
Colour finishes. Leave it galvanised or choose a colour that matches the building.
Security. Locking options for everyday security, and certified rated shutters where insurers ask for them.
Manual or electric. Hand-operated for occasional use, electric for anything opened through the working day.

Jobs we can carry out

Face-fixing a roller shutter with a steel hood where internal racking leaves no room behind the opening.
Installing perforated shutters across a covered loading area so the space stays ventilated and visible when locked.
Replacing a run of rusted shutters on a block of trade units, finished in one matching RAL colour.

Who is responsible for door safety at a site in Eltham?

In England, two sets of duties meet at a powered door. The installer who supplies or motorises it must hand over a door that meets the Supply of Machinery (Safety) Regulations 2008, tested against BS EN 12453 and documented. The business in control of the premises must then maintain it: regulation 5 of the Workplace Regulations 1992 covers maintenance, and regulation 18 requires upward-opening doors to have a device that stops them falling back and powered doors to have features that prevent trapping.

Keeping your site running during the work

Electrical work is the part that most often delays a job. If a new or converted door needs a supply, we confirm the motor's requirement at quote stage so your electrician can provide an isolator in the right place before installation day.

Prices for industrial roller shutters in Eltham

Industrial roller shutters guide prices
Item	Guide price (ex VAT)
Industrial roller shutter, single-skin steel, electric (to c. 4 × 4 m)	£2,395 – £5,495
Manual-to-electric conversion	£1,195 – £3,195
Strip-out and disposal on replacement	£345 – £1,195 per door

Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.

Your questions about industrial roller shutters

Do you repair roller shutters across Greater London?

Yes. We repair most makes of roller shutter across Greater London, including motors, laths, guides, springs and bottom rails. Repair visits are chargeable and priced in advance; we quote before any larger repair.

Does an electric roller shutter at our Eltham site need safety devices?

It depends on the risk assessment. A hold-to-run shutter in view of the operator may need little more than force limiting, while one that closes automatically typically needs a safety edge and photocells, tested to BS EN 12453.

Can you supply security-rated shutters in Eltham?

Yes. Where your insurer asks for a rating such as LPS 1175, we supply a shutter whose manufacturer holds that certification and install it to the certified specification. Check the exact rating your insurer wants before ordering.

Industrial roller shutters near Eltham

Working in Eltham? We also take on jobs in Blackheath, Welling, Sidcup and across Greater London.

Other services in Eltham

More about Industrial roller shutters · industrial doors in Eltham. Last updated 19 October 2026.