Industrial roller shutters in Denton

The short version

Replacing a tired shutter in Denton, or converting a manual one to electric? We quote a fixed price in writing after surveying the opening, then fit, test and hand over the door.

Town: Denton
Postcode district: M34
Area: Greater Manchester
Survey: Free for new installations

Options that matter on site

Manual or electric. Hand-operated for occasional use, electric for anything opened through the working day.
Safety devices. Safety edges, photocells and anti-fall devices on powered shutters.
Security. Locking options for everyday security, and certified rated shutters where insurers ask for them.
Mounting options. We mount the shutter wherever it fits most easily, including outside with a hood over the coil.
Compact coil. The curtain winds onto a barrel above the opening, leaving floor and roof space free.

What this work can involve

Face-fixing a roller shutter with a steel hood where internal racking leaves no room behind the opening.
Fitting a galvanised roller shutter to a new bin store or recycling compound, with a lockable bottom rail.
Renewing the bottom rail, floor seal and end locks on a roller shutter that jams in its guides.

Who is responsible for door safety at a site in Denton?

In England, two sets of duties meet at a powered door. The installer who supplies or motorises it must hand over a door that meets the Supply of Machinery (Safety) Regulations 2008, tested against BS EN 12453 and documented. The business in control of the premises must then maintain it: regulation 5 of the Workplace Regulations 1992 covers maintenance, and regulation 18 requires upward-opening doors to have a device that stops them falling back and powered doors to have features that prevent trapping.

Planning the work around your site

Where a door is being replaced, the opening has to be made secure at the end of each day. We plan strip-out, any new framing and the new door so the gap is never left open overnight unless you have agreed temporary measures.

Guide prices for industrial roller shutters

Industrial roller shutters guide prices
Item	Guide price (ex VAT)
Industrial roller shutter, single-skin steel, electric (to c. 4 × 4 m)	£2,395 – £5,495
Manual-to-electric conversion	£1,195 – £3,195
Strip-out and disposal on replacement	£345 – £1,195 per door

Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.

Your questions about industrial roller shutters

Do you remove old shutters at sites in Denton?

Yes. Strip-out and disposal of the old shutter is shown as a separate line in the quote, along with any repairs to the opening. The old door normally comes out as part of the same visit that fits the new one.

How quickly can a roller shutter be fitted in Denton?

Once the made-to-measure shutter arrives, most single doors are fitted and commissioned in a day. The manufacturer's lead time is confirmed with your quote, and installation is booked around your opening hours.

Can you convert our manual shutter in Denton to electric?

Often, yes, if the barrel, curtain and guides are in good condition. Our guide price for a conversion is £1,195 to £3,195 ex VAT. We become responsible for the conformity paperwork on the converted door and fit the safety devices it needs.

Industrial roller shutters near Denton

Besides Denton, we can survey and quote for sites in Hyde, Dukinfield, Droylsden and the rest of Greater Manchester.

Other services in Denton

More about Industrial roller shutters · industrial doors in Denton. Last updated 19 October 2026.