Industrial roller shutters in Eastleigh

The short version

Replacing a tired shutter in Eastleigh, or converting a manual one to electric? We quote a fixed price in writing after surveying the opening, then fit, test and hand over the door.

Town: Eastleigh
Postcode district: SO50
Area: Hampshire
Survey: Free for new installations

Options for industrial roller shutters in Eastleigh

Mounting options. We mount the shutter wherever it fits most easily, including outside with a hood over the coil.
Manual override. If the power fails, the shutter can still be wound open by hand.
Colour finishes. Leave it galvanised or choose a colour that matches the building.
Compact coil. Nothing runs back under the roof: the shutter coils up neatly above the lintel.
Manual or electric. Hand-operated for occasional use, electric for anything opened through the working day.

Jobs we can carry out

Renewing the bottom rail, floor seal and end locks on a roller shutter that jams in its guides.
Fitting a galvanised roller shutter to a new bin store or recycling compound, with a lockable bottom rail.
Converting hand-chained shutters on a storage unit to electric operation with key-switch controls and safety edges.

Powered door rules that apply in Eastleigh

Eastleigh is in England, where powered industrial doors fall under Great Britain's health and safety law. Whoever makes a door powered — including converting a manual door — usually takes on the manufacturer's duties under the Supply of Machinery (Safety) Regulations 2008: risk assessment, technical file, conformity marking and a Declaration of Conformity. Once it is in use, the employer or occupier must keep it safe under the Workplace (Health, Safety and Welfare) Regulations 1992 and PUWER 1998.

How the work is organised

Where a door is being replaced, the opening has to be made secure at the end of each day. We plan strip-out, any new framing and the new door so the gap is never left open overnight unless you have agreed temporary measures.

Guide prices for industrial roller shutters

Industrial roller shutters guide prices
Item	Guide price (ex VAT)
Industrial roller shutter, single-skin steel, electric (to c. 4 × 4 m)	£2,395 – £5,495
Manual-to-electric conversion	£1,195 – £3,195
Strip-out and disposal on replacement	£345 – £1,195 per door

Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.

Your questions about industrial roller shutters

Do you remove old shutters at sites in Eastleigh?

Yes. Strip-out and disposal of the old shutter is shown as a separate line in the quote, along with any repairs to the opening. The old door normally comes out as part of the same visit that fits the new one.

How quickly can a roller shutter be fitted in Eastleigh?

Once the made-to-measure shutter arrives, most single doors are fitted and commissioned in a day. The manufacturer's lead time is confirmed with your quote, and installation is booked around your opening hours.

Do you repair roller shutters across Hampshire?

Yes. We repair most makes of roller shutter across Hampshire, including motors, laths, guides, springs and bottom rails. Repair visits are chargeable and priced in advance; we quote before any larger repair.

Industrial roller shutters near Eastleigh

Besides Eastleigh, we can survey and quote for sites in Southampton, Winchester, Totton and the rest of Hampshire.

Other services in Eastleigh

More about Industrial roller shutters · industrial doors in Eastleigh. Last updated 19 October 2026.