Industrial roller shutters in Inverness

At a glance

We can fit new steel roller shutters and replace old, damaged ones in Inverness and across the Highlands and Islands, with strip-out, disposal and any new framing priced up front after a free site survey.

Town: Inverness
Postcode district: IV2
Area: Highlands and Islands
Survey: By arrangement

Options that matter on site

Steel curtains. Heavier lath gauges for wide or exposed doors; lighter profiles where space and budget are tight.
Mounting options. Fixed inside, in the reveal or face-fixed outside with a protective hood.
Manual override. Powered shutters keep a chain or handle override so they open without power.
Colour finishes. Plain galvanised or powder-coated to a RAL colour.
Manual or electric. Push-up, chain hoist or motorised operation depending on how often the door opens.

Examples of work we can quote for

Supplying a security-rated roller shutter, installed to the certified specification, to meet an insurer's requirement for a high-value stockroom.
Face-fixing a roller shutter with a steel hood where internal racking leaves no room behind the opening.
Renewing the bottom rail, floor seal and end locks on a roller shutter that jams in its guides.

Who is responsible for door safety at a site in Inverness?

In Scotland, two sets of duties meet at a powered door. The installer who supplies or motorises it must hand over a door that meets the Supply of Machinery (Safety) Regulations 2008, tested against BS EN 12453 and documented. The business in control of the premises must then maintain it: regulation 5 of the Workplace Regulations 1992 covers maintenance, and regulation 18 requires upward-opening doors to have a device that stops them falling back and powered doors to have features that prevent trapping.

Access, phasing and timing

Downtime matters on a working site, so the programme is set around your shifts. For a single door the opening is usually needed for a day; multi-door jobs are done one bay at a time so deliveries keep moving.

Budgeting for industrial roller shutters in Inverness

Industrial roller shutters guide prices
Item	Guide price (ex VAT)
Industrial roller shutter, single-skin steel, electric (to c. 4 × 4 m)	£2,395 – £5,495
Manual-to-electric conversion	£1,195 – £3,195
Strip-out and disposal on replacement	£345 – £1,195 per door

Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.

Guide prices apply to mainland UK sites. For Inverness, travel and access costs are added and shown in your written quote.

Frequently asked questions

Can you supply security-rated shutters in Inverness?

Yes. Where your insurer asks for a rating such as LPS 1175, we supply a shutter whose manufacturer holds that certification and install it to the certified specification. Check the exact rating your insurer wants before ordering.

Do you repair roller shutters across the Highlands and Islands?

Yes. We repair most makes of roller shutter across the Highlands and Islands, including motors, laths, guides, springs and bottom rails. Repair visits are chargeable and priced in advance; we quote before any larger repair.

How much is an industrial roller shutter in Inverness?

An electric single-skin steel roller shutter up to about 4 × 4 m has a guide price of £2,395 to £5,495 ex VAT, supplied and fitted. After a free survey in Inverness, we confirm a fixed price for your opening in writing.

Industrial roller shutters: other towns we cover

Inverness (IV2) is covered by arrangement. Travel and access costs for island and remote sites are added and shown in your written quote.

Other services in Inverness

More about Industrial roller shutters · industrial doors in Inverness. Last updated 19 October 2026.