Industrial roller shutters in Blairgowrie

At a glance

Roller shutters are a practical choice for sites in Blairgowrie (PH10): quick to fit, hard-wearing and compact. We supply them in galvanised or colour-coated steel with the controls you need.

Town: Blairgowrie
Postcode district: PH10
Area: Perth and Kinross
Survey: Free for new installations

Options for industrial roller shutters in Blairgowrie

Safety devices. Motorised shutters get the safety functions their risk assessment needs before handover.
Colour finishes. Plain galvanised or powder-coated to a RAL colour.
Mounting options. Fixed inside, in the reveal or face-fixed outside with a protective hood.
Compact coil. Nothing runs back under the roof: the shutter coils up neatly above the lintel.
Manual or electric. Push-up, chain hoist or motorised operation depending on how often the door opens.

What this work can involve

Fitting a galvanised roller shutter to a new bin store or recycling compound, with a lockable bottom rail.
Renewing the bottom rail, floor seal and end locks on a roller shutter that jams in its guides.
Replacing a run of rusted shutters on a block of trade units, finished in one matching RAL colour.

Who is responsible for door safety at a site in Blairgowrie?

In Scotland, two sets of duties meet at a powered door. The installer who supplies or motorises it must hand over a door that meets the Supply of Machinery (Safety) Regulations 2008, tested against BS EN 12453 and documented. The business in control of the premises must then maintain it: regulation 5 of the Workplace Regulations 1992 covers maintenance, and regulation 18 requires upward-opening doors to have a device that stops them falling back and powered doors to have features that prevent trapping.

How the work is organised

Electrical work is the part that most often delays a job. If a new or converted door needs a supply, we confirm the motor's requirement at quote stage so your electrician can provide an isolator in the right place before installation day.

Guide prices for industrial roller shutters

Industrial roller shutters guide prices
Item	Guide price (ex VAT)
Industrial roller shutter, single-skin steel, electric (to c. 4 × 4 m)	£2,395 – £5,495
Manual-to-electric conversion	£1,195 – £3,195
Strip-out and disposal on replacement	£345 – £1,195 per door

Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.

Your questions about industrial roller shutters

How much is an industrial roller shutter in Blairgowrie?

An electric single-skin steel roller shutter up to about 4 × 4 m has a guide price of £2,395 to £5,495 ex VAT, supplied and fitted. After a free survey in Blairgowrie, we confirm a fixed price for your opening in writing.

Does an electric roller shutter at our Blairgowrie site need safety devices?

It depends on the risk assessment. A hold-to-run shutter in view of the operator may need little more than force limiting, while one that closes automatically typically needs a safety edge and photocells, tested to BS EN 12453.

Can you convert our manual shutter in Blairgowrie to electric?

Often, yes, if the barrel, curtain and guides are in good condition. Our guide price for a conversion is £1,195 to £3,195 ex VAT. We become responsible for the conformity paperwork on the converted door and fit the safety devices it needs.

Industrial roller shutters near Blairgowrie

Our teams cover Blairgowrie (PH10) and nearby Perth, Dundee, Forfar, along with the rest of Perth and Kinross.

Other services in Blairgowrie

More about Industrial roller shutters · industrial doors in Blairgowrie. Last updated 19 October 2026.