Industrial roller shutters in Crieff

At a glance

Replacing a tired shutter in Crieff, or converting a manual one to electric? We quote a fixed price in writing after surveying the opening, then fit, test and hand over the door.

Town: Crieff
Postcode district: PH7
Area: Perth and Kinross
Survey: Free for new installations

What we fit in Crieff

Steel curtains. Galvanised steel laths in gauges to suit the width and the level of abuse expected.
Mounting options. Fixed inside, in the reveal or face-fixed outside with a protective hood.
Colour finishes. Plain galvanised or powder-coated to a RAL colour.
Manual override. If the power fails, the shutter can still be wound open by hand.
Compact coil. The curtain winds onto a barrel above the opening, leaving floor and roof space free.

Examples of work we can quote for

Replacing a vehicle-damaged shutter in a trade yard with a heavier-gauge curtain and guide-rail protection.
Renewing the bottom rail, floor seal and end locks on a roller shutter that jams in its guides.
Replacing a run of rusted shutters on a block of trade units, finished in one matching RAL colour.

Powered door rules that apply in Crieff

Crieff is in Scotland, where powered industrial doors fall under Great Britain's health and safety law. Whoever makes a door powered — including converting a manual door — usually takes on the manufacturer's duties under the Supply of Machinery (Safety) Regulations 2008: risk assessment, technical file, conformity marking and a Declaration of Conformity. Once it is in use, the employer or occupier must keep it safe under the Workplace (Health, Safety and Welfare) Regulations 1992 and PUWER 1998.

Keeping your site running during the work

Most installations in Crieff can be phased so part of the site keeps working. We agree access routes, exclusion zones and any temporary security with you before the team arrives, and can work early mornings, evenings or weekends where the business needs it.

Prices for industrial roller shutters in Crieff

Industrial roller shutters guide prices
Item	Guide price (ex VAT)
Industrial roller shutter, single-skin steel, electric (to c. 4 × 4 m)	£2,395 – £5,495
Manual-to-electric conversion	£1,195 – £3,195
Strip-out and disposal on replacement	£345 – £1,195 per door

Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.

Your questions about industrial roller shutters

How quickly can a roller shutter be fitted in Crieff?

Once the made-to-measure shutter arrives, most single doors are fitted and commissioned in a day. The manufacturer's lead time is confirmed with your quote, and installation is booked around your opening hours.

Do you remove old shutters at sites in Crieff?

Yes. Strip-out and disposal of the old shutter is shown as a separate line in the quote, along with any repairs to the opening. The old door normally comes out as part of the same visit that fits the new one.

Can you convert our manual shutter in Crieff to electric?

Often, yes, if the barrel, curtain and guides are in good condition. Our guide price for a conversion is £1,195 to £3,195 ex VAT. We become responsible for the conformity paperwork on the converted door and fit the safety devices it needs.

Industrial roller shutters near Crieff

Crieff is in the PH7 postcode district in Perth and Kinross. We also cover Perth, Alloa, Stirling.

Other services in Crieff

More about Industrial roller shutters · industrial doors in Crieff. Last updated 19 October 2026.