Industrial door motor replacement in Crieff

At a glance

When the original motor on a door in Crieff (PH7) is no longer made, we fit an equivalent drive with the adapters it needs, set new limits and test closing forces before handover.

Town: Crieff
Postcode district: PH7
Area: Perth and Kinross
Guide price: £845 – £2,395

What our engineers check and fix

Matched drives. Each replacement drive is selected for the door it will move, not just the old part number.
Obsolete motors. When a motor is discontinued, we fit a suitable alternative and adapt the mounting.
Re-commissioning. The door is fully re-commissioned and tested before it goes back into use.
Brake and override. The new drive holds the door securely and can still be opened by hand in a power cut.
Panel upgrades. Older panels can be replaced at the same time for better reliability and safety.

Typical scopes of work

Upgrading an old relay control panel to a modern unit with monitored safety edge inputs during a motor change.
Replacing a burnt-out direct-drive motor on a loading bay door and fitting an inverter control panel at the same time.
Re-commissioning a sectional door once a new motor is fitted, including new limit settings and closing force tests.

Who is responsible for door safety at a site in Crieff?

In Scotland, two sets of duties meet at a powered door. The installer who supplies or motorises it must hand over a door that meets the Supply of Machinery (Safety) Regulations 2008, tested against BS EN 12453 and documented. The business in control of the premises must then maintain it: regulation 5 of the Workplace Regulations 1992 covers maintenance, and regulation 18 requires upward-opening doors to have a device that stops them falling back and powered doors to have features that prevent trapping.

How the work is organised

On a first visit we record each door's make, size, control type and condition. That record makes later repairs quicker to price and helps you plan replacements before a door fails.

Budgeting for industrial door motor replacement in Crieff

Industrial door motor replacement guide prices
Item	Guide price (ex VAT)
Motor replacement	£845 – £2,395
Repair visit (attendance and first hour)	£145 – £195

Guide prices excluding VAT, which is added at the current rate where it applies. The visit price is agreed before we attend, and any repair is quoted before we carry it out.

Frequently asked questions

Will our door in Crieff be tested after the motor is changed?

Yes. We set limits, test the brake and manual override, check safety devices and measure closing forces where required, then give you a written record of the work and test results.

Should we replace the whole door instead of the motor in Crieff?

If the door itself is old, damaged or needs several other repairs, replacement can be better value. We price both where it makes sense, so you can weigh up the cost and remaining life honestly.

How much does an industrial door motor replacement cost in Crieff?

Our guide price for a replacement motor is £845 to £2,395 ex VAT, supplied and fitted, depending on door size, drive type and whether a new control panel is needed. A diagnostic repair visit in Crieff costs £145 to £195 ex VAT.

Industrial door motor replacement near Crieff

Our teams cover Crieff (PH7) and nearby Perth, Alloa, Stirling, along with the rest of Perth and Kinross.

Other services in Crieff

More about Industrial door motor replacement · industrial doors in Crieff. Last updated 19 October 2026.