Industrial door motor replacement in Blairgowrie

In short

Replacing a door motor at a site in Blairgowrie is a chance to upgrade the control panel too, adding inverter control, remotes, loops or traffic lights at the same time.

Town: Blairgowrie
Postcode district: PH10
Area: Perth and Kinross
Guide price: £845 – £2,395

What our engineers check and fix

Brake and override. Brakes tested and manual override checked on every change.
Fault diagnosis. Diagnosis comes first, so you only pay for the parts the door actually needs.
Re-commissioning. Limits set, cycles tested and safety devices checked before handover.
Obsolete motors. When a motor is discontinued, we fit a suitable alternative and adapt the mounting.
Force testing. Where it applies, we measure closing forces to confirm the door is safe after the change.

Typical scopes of work

Changing a tubular motor in a small service shutter that overheats and trips during busy periods.
Diagnosing a stalling roller shutter to confirm whether the motor, a broken spring or the control panel is at fault.
Replacing a burnt-out direct-drive motor on a loading bay door and fitting an inverter control panel at the same time.

Safety law for industrial doors in Scotland

Industrial doors in Blairgowrie are covered by the same rules as the rest of Great Britain. On handover you should receive user instructions and, for a powered door, the conformity paperwork, because the installer is treated as the manufacturer when they assemble or motorise it. Afterwards, keeping the door in efficient working order is the occupier's job under the Workplace Regulations 1992 and PUWER 1998, which in practice means regular servicing and a written log.

Planning the work around your site

Testing and repairs can mean closing an opening, so we agree timing and access with you before the visit, including early, late or weekend slots where the site needs them.

Guide prices

Industrial door motor replacement guide prices
Item	Guide price (ex VAT)
Motor replacement	£845 – £2,395
Repair visit (attendance and first hour)	£145 – £195

Guide prices excluding VAT, which is added at the current rate where it applies. The visit price is agreed before we attend, and any repair is quoted before we carry it out.

Questions from businesses in Blairgowrie

Do you replace motors on any make of door across Perth and Kinross?

We replace motors on most makes of roller shutter, sectional, sliding and high-speed door across Perth and Kinross, whoever installed them, subject to a suitable drive being available for the door's weight and mounting.

Is the motor really the problem with our door in Blairgowrie?

Not always. Broken springs, damaged guides, failed panels, safety device faults and supply problems can all look like a failed motor. We diagnose first so you do not pay for a motor that will not fix the fault.

How much does an industrial door motor replacement cost in Blairgowrie?

Our guide price for a replacement motor is £845 to £2,395 ex VAT, supplied and fitted, depending on door size, drive type and whether a new control panel is needed. A diagnostic repair visit in Blairgowrie costs £145 to £195 ex VAT.

Industrial door motor replacement near Blairgowrie

Working in Blairgowrie? We also take on jobs in Perth, Dundee, Forfar and across Perth and Kinross.

Other services in Blairgowrie

More about Industrial door motor replacement · industrial doors in Blairgowrie. Last updated 19 October 2026.