Steel personnel and fire exit doors in Blairgowrie

The short version

Steel personnel doors and fire exit doors for warehouses, factories, plant rooms and trade units in Blairgowrie. We survey each opening, specify the right hardware and rating, then supply and fit a complete steel doorset.

Town: Blairgowrie
Postcode district: PH10
Area: Perth and Kinross
Survey: Free for new installations

Options for steel personnel and fire exit doors in Blairgowrie

Galvanised steel. Leaves made from two zinc-coated steel skins, finished in a hard-wearing powder coat.
Panic hardware. Push bars to BS EN 1125 where the public or unfamiliar people may use the exit.
Complete doorsets. Everything comes together as a matched doorset, so it fits and works as designed.
Security options. From hinge bolts to certified security doorsets, the door can be specified to resist attack.
Outside access. Key or code access from outside while the exit stays free from inside.

Examples of work we can quote for

Fitting hinge bolts and a multi-point lock to a steel back door to resist levering and forced entry.
Installing a leaf-and-a-half steel doorset so equipment can pass through a plant room door when needed.
Supplying 60-minute fire-resisting steel doorsets for the compartment walls set out in a building's fire strategy.

Which workplace rules apply to these doors?

For premises in Blairgowrie, the Workplace Regulations 1992 set the basics: doors suitably constructed, swing doors giving a clear view through when closed, and maintenance under regulation 5. Under the Fire (Scotland) Act 2005 and the Fire Safety (Scotland) Regulations 2006, an emergency exit door must open easily in the direction of travel and must not be locked or fastened so it cannot be opened immediately in an emergency.

Access, phasing and timing

Sites in and around Blairgowrie vary from tight trade counters to large distribution yards. The survey records access for our vehicle and platform, overhead obstructions and floor condition so the installation day runs without surprises.

Guide prices for steel personnel and fire exit doors

Steel personnel and fire exit doors guide prices
Item	Guide price (ex VAT)
Steel personnel door, single	£845 – £1,795
Steel fire exit door with panic hardware	£1,095 – £2,395
Strip-out and disposal on replacement	£345 – £1,195 per door

Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.

Questions from businesses in Blairgowrie

Can a steel door at our Blairgowrie unit be security rated?

Yes. Where an insurer asks for a formal rating, we supply steel doorsets certified to LPS 1175 and install them to the certified specification. Let us know the rating required so we can quote the right product.

Which fire exit hardware do we need at our Blairgowrie site?

If members of the public or people unfamiliar with the exit may use it, panic hardware to BS EN 1125 is normally required. Exits used only by trained staff who know the door can use emergency devices to BS EN 179. If in doubt, choose BS EN 1125.

Do you repair fire exit doors across Perth and Kinross?

Yes. We repair and replace panic bars, emergency devices, closers, hinges and locks on steel doors across Perth and Kinross. Repair visits are chargeable, and on fire-rated doors we only fit hardware covered by the door's test evidence.

Steel personnel and fire exit doors near Blairgowrie

Blairgowrie is in the PH10 postcode district in Perth and Kinross. We also cover Perth, Dundee, Forfar.

Other services in Blairgowrie

More about Steel personnel and fire exit doors · industrial doors in Blairgowrie. Last updated 19 October 2026.