At a glance
Steel personnel doors and fire exit doors for warehouses, factories, plant rooms and trade units in Dundee. We survey each opening, specify the right hardware and rating, then supply and fit a complete steel doorset.
- Town
- Dundee
- Postcode district
- DD1
- Area
- Angus and Dundee
- Survey
- Free for new installations
Options for steel personnel and fire exit doors in Dundee
- Panic hardware. Push bars to BS EN 1125 where the public or unfamiliar people may use the exit.
- Security options. Hinge bolts, multi-point locks and LPS 1175 rated doorsets.
- Emergency devices. Lever or push-pad devices to BS EN 179 for exits used by trained staff.
- Complete doorsets. Everything comes together as a matched doorset, so it fits and works as designed.
- Galvanised steel. Leaves made from two zinc-coated steel skins, finished in a hard-wearing powder coat.
What this work can involve
- Fitting hinge bolts and a multi-point lock to a steel back door to resist levering and forced entry.
- Changing worn panic bars on fire exits and adjusting the overhead closers so each door latches properly.
- Supplying 60-minute fire-resisting steel doorsets for the compartment walls set out in a building's fire strategy.
Which workplace rules apply to these doors?
For premises in Dundee, the Workplace Regulations 1992 set the basics: doors suitably constructed, swing doors giving a clear view through when closed, and maintenance under regulation 5. Under the Fire (Scotland) Act 2005 and the Fire Safety (Scotland) Regulations 2006, an emergency exit door must open easily in the direction of travel and must not be locked or fastened so it cannot be opened immediately in an emergency.
How the work is organised
For busy sites in Angus and Dundee the work can be split across visits — preparation and framing first, door installation and commissioning second — so the opening is only out of action for the shortest time.
Budgeting for steel personnel and fire exit doors in Dundee
| Item | Guide price (ex VAT) |
|---|---|
| Steel personnel door, single | £845 – £1,795 |
| Steel fire exit door with panic hardware | £1,095 – £2,395 |
| Strip-out and disposal on replacement | £345 – £1,195 per door |
Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.
Questions from businesses in Dundee
Can our Dundee fire exit be locked from outside?
Yes. It can be secure from outside, with a key or code device or no external hardware, as long as it always opens from inside using the exit hardware. Never lock or chain a fire exit while people are in the building.
Do you repair fire exit doors across Angus and Dundee?
Yes. We repair and replace panic bars, emergency devices, closers, hinges and locks on steel doors across Angus and Dundee. Repair visits are chargeable, and on fire-rated doors we only fit hardware covered by the door's test evidence.
Can you fit fire-rated steel doors in Dundee?
Yes. We supply fire-resisting steel doorsets with the manufacturer's test evidence for the rating your fire strategy needs, and install them strictly to the manufacturer's instructions, including seals, gaps and approved hardware.
Steel personnel and fire exit doors near Dundee
Dundee is in the DD1 postcode district in Angus and Dundee. We also cover St Andrews, Forfar, Arbroath.
- Steel personnel and fire exit doors in St Andrews
- Steel personnel and fire exit doors in Forfar
- Steel personnel and fire exit doors in Arbroath
- Steel personnel and fire exit doors in Blairgowrie
- Steel personnel and fire exit doors in Perth
- Steel personnel and fire exit doors in Glenrothes
Other services in Dundee
- Impact traffic doors
- Door safety upgrades
- Sliding and folding industrial doors
- Planned maintenance contracts
- Industrial door motor replacement
- Bollards and door protection
- Door automation and controls
- Hangar and large-span doors
More about Steel personnel and fire exit doors · industrial doors in Dundee. Last updated 19 October 2026.
