In short
Plant rooms, switch rooms and back doors in Perth need doors that are tough and secure. We fit steel doors with louvres, hinge bolts, multi-point locks and closers to suit each opening.
- Town
- Perth
- Postcode district
- PH1
- Area
- Perth and Kinross
- Survey
- Free for new installations
What to specify
- Emergency devices. Staff-only exits used by people who know the door can take BS EN 179 lever or pad hardware.
- Louvres and vision. Louvred leaves for plant rooms and vision panels where visibility helps.
- Security options. Hinge bolts, multi-point locks and LPS 1175 rated doorsets.
- Fire-rated doorsets. Fire-resisting steel doors with the manufacturer's test evidence, fitted to its instructions.
- Galvanised steel. Double-skin galvanised steel leaves with powder-coated finishes.
What this work can involve
- Fitting hinge bolts and a multi-point lock to a steel back door to resist levering and forced entry.
- Installing a steel staff entrance door with an overhead closer and keypad access beside a loading bay.
- Replacing seized BS EN 179 push pads on staff-only exits in a factory or production building.
Which workplace rules apply to these doors?
For premises in Perth, the Workplace Regulations 1992 set the basics: doors suitably constructed, swing doors giving a clear view through when closed, and maintenance under regulation 5. Under the Fire (Scotland) Act 2005 and the Fire Safety (Scotland) Regulations 2006, an emergency exit door must open easily in the direction of travel and must not be locked or fastened so it cannot be opened immediately in an emergency.
Keeping your site running during the work
Downtime matters on a working site, so the programme is set around your shifts. For a single door the opening is usually needed for a day; multi-door jobs are done one bay at a time so deliveries keep moving.
Budgeting for steel personnel and fire exit doors in Perth
| Item | Guide price (ex VAT) |
|---|---|
| Steel personnel door, single | £845 – £1,795 |
| Steel fire exit door with panic hardware | £1,095 – £2,395 |
| Strip-out and disposal on replacement | £345 – £1,195 per door |
Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.
Frequently asked questions
Can our Perth fire exit be locked from outside?
Yes. It can be secure from outside, with a key or code device or no external hardware, as long as it always opens from inside using the exit hardware. Never lock or chain a fire exit while people are in the building.
Do you repair fire exit doors across Perth and Kinross?
Yes. We repair and replace panic bars, emergency devices, closers, hinges and locks on steel doors across Perth and Kinross. Repair visits are chargeable, and on fire-rated doors we only fit hardware covered by the door's test evidence.
Can you fit fire-rated steel doors in Perth?
Yes. We supply fire-resisting steel doorsets with the manufacturer's test evidence for the rating your fire strategy needs, and install them strictly to the manufacturer's instructions, including seals, gaps and approved hardware.
Steel personnel and fire exit doors near Perth
Working in Perth? We also take on jobs in Kinross, Blairgowrie, Crieff and across Perth and Kinross.
- Steel personnel and fire exit doors in Kinross
- Steel personnel and fire exit doors in Blairgowrie
- Steel personnel and fire exit doors in Crieff
- Steel personnel and fire exit doors in Glenrothes
- Steel personnel and fire exit doors in Dundee
- Steel personnel and fire exit doors in Kirkcaldy
Other services in Perth
- Industrial roller shutters
- Fire shutter servicing and drop tests
- Planned maintenance contracts
- Cold store and freezer doors
- Sliding and folding industrial doors
- Dock shelters and seals
- Industrial door replacement
- Bollards and door protection
More about Steel personnel and fire exit doors · industrial doors in Perth. Last updated 19 October 2026.